eReplacementParts.com
877-346-4815
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  CB155 Carbon Brush Set

Install
Videos!
Carbon Brush Set - CB155:Makita 360 View
Carbon Brush Set - CB155:MakitaCarbon Brush Set - CB155:MakitaCarbon Brush Set - CB155:Makita 360 View

Carbon Brush Set CB155

Part Number: CB155
Makita
Availability: In Stock
Price: $19.80
Ships within 1 business day

*This part replaces obsolete part #: 643155-4 and 181048-2.

Product Information
Description:
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box.



This brush set will fit the Makita tools listed at the bottom of the page.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Frequently Purchased With
Products Compatibility

This item works with the following types of products:

  • • Circular Saw
  • • Demolition Hammer
  • • Rotary Hammer
  • • Saw
Repair Guides
Watch the Repair Video for Carbon Brush Set

Questions & Answers for Carbon Brush Set


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
4 of 4 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Brush Holder Cap - 643650-4
Carbon Brush Set - CB155
Rear Cover - 284055-5
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Missing parts.
Replaced the missing parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Carbon Brush Set - CB155
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn brushes.
Removed the old brushes and put the new ones in. Very simple job done in five minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Electric Drill
Parts Used:
Carbon Brush Set - CB155
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, allen wrenches
Drill stopped working while in use
I had to disassemble the entire hammer drill for a good cleaning, lubing and to diagnose the problem. If you know the problem and only have to replace the brushes, it can usually be done by removing the metal cover on the electric motor and accessing the brushes under the black access covers with a flathead screwdriver. One of mine was stuck and did not move freely. It is a good idea to inspect the armature, commutator, windings and bearings to see if there are any reasons for the failure.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Carbon Brush Set - CB155
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, allen wrench
No power, motor sparking, broken motor brush
remove bottom motor cover plate.
unscrew brush cover gromet.
replace carbon brush.
screw brush cover gromet back on.
repeat for other side of motor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rotary Hammer
Parts Used:
Carbon Brush Set - CB155
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen keys
worn out brushes
Remove protective cap.
Remove brush caps
Remove old brushes
Insert new brushes
Return brush caps
Return protective cap
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rotary Hammer
Parts Used:
Carbon Brush Set - CB155
Switch - 651145-3
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set, Nutdriver
Drill just stopped working
After doing a continuity test to see where the power was not reaching, I decided that the switch was bad. So I ordered a switch and a new set of brushes just to get the drill as new working as possible. Success was the outcome and I am back to coreing masonary holes.
Thank you ereplacementparts.com
Jay
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy Fix
    Parts always arrive quickly and as described. Thank you
    Alex - June 7, 2021 Verified Purchase
    right parts
    Awesome service , parts received and installed Thank you
    Guest - July 21, 2020 Verified Purchase
    Rotohammer repair.
    I needed new carbon brushes to get my Rotohammer back up and running. The parts arrived promptly and I was back in action.
    Guest - July 12, 2020 Verified Purchase
    Very good service
    Excelent
    Edgardo - December 5, 2019 Verified Purchase
    repairing old tool
    No model# but found parts that were a perfect fit. Shipping was a little slow.
    Guest - September 1, 2022 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Repair Guides
    Watch the Repair Video for Carbon Brush Set
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal