eReplacementParts.com
877-346-4815
Makita Parts
Repair Parts Home
  
Power Tool Parts
  
Makita Parts
  CB107 Carbon Brush Set Cb-107

Carbon Brush Set Cb-107 CB107

OEM part for: Makita

Part Number: CB107


Install
Videos!
Carbon Brush Set Cb-107 - CB107:Makita 360 View
Carbon Brush Set Cb-107 - CB107:MakitaCarbon Brush Set Cb-107 - CB107:MakitaCarbon Brush Set Cb-107 - CB107:Makita 360 View
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Medium 15-30 minutes (2 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Makita replacement part
Set of 2 Carbon Brushes with wire lead and brush spring attached.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 11 machines

Makita

HP2010N Hammer Drill View Diagrams & Manuals
1911B 4-3/8" Planer View Diagrams & Manuals
RP0900K 1-1/4 HP Plunge Router View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Router Parts
  • Planer Parts
  • Drill Parts
  • Hammer Drill Parts

This part replaces obsolete part #: 643107-5, 643117-2, 643104-1A, 643104-1, 181437-1

Repair Videos ?

Watch the Repair Video for Carbon Brush Set Cb-107

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fast service
    Easy, peasy! Got what I needed quickly and tool now working again!
    William - March 25, 2021 Verified Purchase
    Flawless installation in 2 minutes.
    Prop perfect fit, I only added brushes as shipping cost are high and good to have newies. When my old prop disintegrated the brushes got a hit too. Well done Ereplacement folks. Shipping costs are depressing but that’s a fact of life when you decide to retire in a place where I am now.
    iGlobal - October 4, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set Cb-107


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 15-30 minutes (2 rated repairs)?

    Cord was stripped and brushes were worn out - drill was given to me

    Nick - November 11, 2020
    Tool Type

    Hammer Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers, Wire Strippers

    1. Removed side case (drill unplugged)
    2. Removed retaining brackets on cord positive and negative terminals on switch housing. (Noted which was positive/negative for new cord)
    3. Removed cord retention gate at bottom of drill housing.
    4. Disposed of damaged cord/old cord guard.
    5. Placed new guard and cord into channel and secured with retention gate.
    6. Snipped positive/negative ends of new cord to correct length and placed ends into corresponding terminals on switch housing, secured with screws.
    7. Removed and replaced brush magnets using screwdriver.
    8. Double checked all was in order, re-seated case and screwed it down.
    9. Performed test of drill to confirm correct installation, checked forward and reverse function, speed adjustment, and gearbox selection.
    10. Done!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Wouldn't turn on. Had a broken carbon brush.

    Tarael - July 19, 2020
    Tool Type

    Router

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver

    Opened the case and removed the brushes. It was not to difficult but getting the brush out of its rubber housing was a bit tricky and required patience and a couple of small probes and small screwdriver. Had to re-solder the the new brush in. Put it back in the case and screwed it back together. It works fine now.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal