Easy
Less than 15 minutes
This is a Genuine Manufacturer Sourced replacement part used on certain Dremel Variable Speed Rotary Tool. This item includes Two (2) Carbon Brushes with Lead Wires Attached.
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Carbon Brush Set 2610921562
OEM part for: Dremel, Bosch
Part Number: 2610921562
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Dremel
This item works with the following types of products:
- Multi-Tool Parts
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carbon Brush Set
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Change worn brushes
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Dremel rotary tool
Parts Used
Brush holder was broken and brushes were misaligned
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
I then removed the brush covers and pulled the brushes.
I then removed the screws from the right side and lifted off the side.
Next I lifted out the armature and brush holder and removed the 2 wires from the holder.
The holder just pulled off easily and the new one slipped on and locked in place.
I then reconnected the wires to the new holder and dropped it back into the left half.
Carefully the collet lock has to be reinserted and the right half pressed closed and screwed together.
Reinserted the brushes and covers then installed the collet cap and hanging wire.
Then I plugged the tool in and tested it. Done
Dremel 400 xpr tune up
Tool Type
MultiTool
Difficulty
Medium
Time
30-60 minutes
Tools Used
, pick-electronic spray cleaner-oil-Magnification
NOTE--The blue slide is a real issue for the 400 and 4000 models.Sometimes they won't turn off the Dremel and other times wont turn on.It is a most overlooked issue until you study it closely.It deforms at the switch side due to heat and age.EASY fix. Good Luck
Burning smell when being used
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
2 Removed old carbon Brushes with needle nose pliers.
3 Inserted new Brushes.
4 Snapped in new Brush Doors.
Brushes were worn
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Dremel rotary tool
Parts Used
Dremel quit operating
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, The little screwdriver/wrench that was supplied with dremel
2. Followed the same steps
Highly recommend replacing brushes if your dremel stop running correctly
Stopped working.. one brush had broken ..
Tool Type
MultiTool
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
Parts Used
Dremel xpr400 did not work. Figured correctly it were the brushes needing replacement
Tool Type
MultiTool
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill, Pliers
Started and stopped while using the tool.
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Was running erratic slowing down
Tool Type
MultiTool
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, wire strippers soldering iron
Repair was easy enough thanks to ereplacement parts having the exact matching parts. Couldn't find procedure to release power cord wires, so cut and soldered new cord with shrink on the wires. Didn't take long and runs like new.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
