eReplacementParts.com
877-346-4815
Ryobi Parts
Repair Parts Home  Power Tool Parts  Ryobi Parts  0502025007 Carbon Brush

Carbon Brush 0502025007

OEM part for: Ryobi, Ridgid

Part Number: 0502025007


Install
Videos!
Carbon Brush - 0502025007:Ryobi 360 View
Carbon Brush - 0502025007:RyobiCarbon Brush - 0502025007:RyobiCarbon Brush - 0502025007:Ryobi 360 View
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Easy 15-30 minutes (16 rated repairs)?
OEM: Original Equipment Manufacturer ?
RyobiRidgid
Does this d-block d-md-none fit my product?

Product Description ?

This is a Genuine Manufacturer Sourced replacement part. This is a Carbon Brush with Lead Wire attached and a Spring. This Brush is Sold Individually. Please note Brush Holder is Sold Separately.

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time.

You would need a Screwdriver and Pliers to complete this job.

  • Dimension: 7 X 17 X 19/17
  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 11 machines

Ryobi

BTS16 10" Table Saw View Diagrams & Manuals
BTS20R-1 10" Table Saw View Diagrams & Manuals
BTS21 10" Table Saw View Diagrams & Manuals
BTS211 10" Table Saw View Diagrams & Manuals
RTS31 10 In. Table Saw View Diagrams & Manuals

Ridgid

R4516 Table Saw View Diagrams & Manuals
R4513 Table Saw View Diagrams & Manuals
R4092 10" Table Saw View Diagrams & Manuals
R45171 Table Saw 7-26-18 (Rev:05) View Diagrams & Manuals
R45171NS Table Saw 5-4-18 (Rev:01) View Diagrams & Manuals
R45171T Table Saw View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Saw Parts
  • Table Saw Parts

This part replaces obsolete part #: 089110102254

Customer Part Reviews ?

4.9
Average Rating (out of 5):
7 Reviews
Click to filter by ratings:
5 stars
6
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Excellent parts
    Parts and the prompt service were great
    Al - March 23, 2022 Verified Purchase
    All good
    Very happy with price and prompt delivery
    iGlobal - June 10, 2021 Verified Purchase
    Saw parts
    I ordered several parts for my table saw, online parts listing was spot on all shipped very timely
    Guest - April 20, 2021 Verified Purchase
    Hard repair but, all the parts I needed
    Easy to find the right parts for my table saw. Parts came quick, bagged, and labeled. Couldn't be happier with this site. I'm so glad I found it.
    mike - February 25, 2021 Verified Purchase
    Quick fix, saved hundreds
    The brushes I ordered. Came in quick and worked perfectly. I was told by tool repair shop just buy new table saw , two little brushes saved me about 400 bucks thanks e- replacement
    Guest - February 22, 2020 Verified Purchase
    Easy fix
    My saw had some damaged ones replace them in line 2 min
    Guest - September 7, 2019 Verified Purchase
    Easy fix
    Excellent condition
    Guest - June 28, 2023 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush


    Does the motor brushes come in a set?
    Charles asked on 2023-03-20
    Hello Charles, Thank you for your inquiry. According to the part description under the part information, this brush is sold individually. We hope this helps you.
    eReplacementParts Team March 20, 2023
    Are these three correct brushes for my rigid R4513 table saw motor? My saw will not start. It instantly trips the breaker when turned on. I'm assuming it has a bad motor. Think these will fix it?
    Justin for model number Rigid R4513 asked on 2022-07-17
    Hello Justin, thank you for your question. We can confirm that this brush 0502025007 is the correct one for your Rigid model R4513. However, we cannot confirm that the brushes will fix the issue. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Good luck with your repair.
    eReplacementParts Team July 17, 2022
    Motor table saw
    Samuel for model number R4513 asked on 2022-04-25
    Hello Samuel, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 089290001716. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
    eReplacementParts Team April 25, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (16 rated repairs)?

    Switch failed, leg foot worn. Brushes for preventive maintenamce

    Charles - March 15, 2017
    👍 5 of 5 people found this instruction helpful
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Remove the four screws from the switch and pull it out far enough to exchange the wires on the back.
    Tap the leg plugs in with a mallet
    Remove the brush caps
    Remove the old brushes
    Install the new brushes
    Screw the brush caps back on
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn brushes, lost my pusher

    Radu - February 20, 2017
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the brush cap from the motor housing
    Removed the old brushes
    Installed the new brushes
    Replace the brush caps
    Push stick will be used when needed
    It only took me 3-4 min to replace the parts. 100% original, fast shipping. Will buy all my parts from these guys
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Table saw would not come on. Power switch tested good.

    Herman - February 16, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Table Saw

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Wrench Set, Mallet to tap in brush tubes

    1. Unplug power
    2. Remove saw blade
    3. Tilt saw with power switch up
    4. Remove backing off power switch
    5. Remove cable clamps and green ground wires. This will help in access the connector easier.
    6. Unplug connectors from the motor to the power switch
    7. Remove motor bracket mounting bolts
    8. Remove black brush caps and pull out brushes. Replace if necessary. Put everything back together and verify problem solved. If your brush tubes are melted you will need to continue.
    9. Remove 4 screws from motor housing.
    10. Pull motor out
    11. Remove 2 screws which holds the black plastic bracket and remove bracket.
    12. Remove coil pack. Disconnect black and white wires from brush tube. Set coil pack down.
    13. Remove old brush tube by tapping the back side. They come out through the top. I used a pry bar, gave it a few taps, then used a flat tip to remove it. Remember the position of the electrical connector.
    Note: My new brush tubes came with the electrical connector straight. You will have to bend them 90 deg AFTER you install them.
    14. Install new brush tube exactly how it came out. Tube electrical connector should be towards the inside Tap with mallet.
    15. Use needle nose pliers to bend tube connector 90 deg. Use same pliers to connect black and white wires. DO NOT INSTALL new brushes until you install the motor first.
    16. Install coil pack and black plastic bracket secure with 2 screws. Make sure you have enough slack on your green ground wire.
    17. Install motor. Tap with mallet. Then turn more and look inside motor housing to make sure the spinning motor doesn't touch brush tube wire or connector. If it does, bend tube connector until it is clear of the motor.
    18. If motor spins freely, install 4 motor screws and green ground wire.
    19. Install new brushing and black caps.
    20. Put back together and verify problem solved.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Table saw wouldn't start. Just brief click after flipping start switch.

    Jackie - October 8, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Unscrewed retaining caps on each side of motor housing, inserted new brushes, and reinstalled caps. (Please note that this review is for a normal repair. Unfortunately, the slot for the replacement brush on one side of my Rigid table saw was slightly undersized, and my brush would not fit into it, which turned an extremely simple repair into a somewhat daunting task which I have not yet fully completed. This is NOT the fault of the ereplacement parts, but of the table saw itself.)
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes broken

    Read - July 16, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    The repair went very easy.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn Helical Gear on Craftsman Table Saw (Model # 315.218060) (Mfg by Ryobi Model # BTS-21)

    Steven - December 8, 2015
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Allen Wrench

    1. Remove six external screws
    2. Carefully remove gearbox assembly
    3. Remove Arbor Assembly from Gearbox
    4. Remove Brushes
    5. Remove Armature assembly
    6. To remove Brush Holders - Loosen two Allen screws on the rear of the motor housing and with long Needle Nose Pliers remove Spade Connectors inside the housing. They will then slide out.
    Now to reassemble
    Reverse order
    When re-assembling Gearbox remember to grease gears liberally. I used Lucas Heavy Duty Grease 10301-1
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bearings bad on my table saw motor

    William - August 13, 2023
    Tool Type

    Table Saw

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Socket set, Bearing puller

    Removed motor cracked open pulled apart cleaned replaced bearings and brushes, re assemble works great.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Motor would not operate at all.

    Thomas - March 15, 2023
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    I had to remove the motor for the gear box to remove the old brushes because 1 brush was stuck and came apart. It just happened to be the one thats a bit harder to get to, of course. Only 4 screws and it came right off. I had to use a flat head screw driver to losses the brush then pliers to remove it. Put the new brushes in. Which fit perfectly. Replaced the caps. Put the motor back onto the gear box. Started right up and has been working fine ever since. Was extremely happy with the brushes and the customer support received from ereplacementparts.com. I highly recommend them.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brush cap vibrated loose and disappeared. And brushes were worn out.

    Jimmy - February 26, 2023
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Stubby slotted screwdriver

    I put the table saw on its side to gain access to the motor. Using a stubby screwdriver I removed the remaining brush cap, pulled out the brushes and replaced them. The saw works like new. Thanks.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Motor was skipping

    bernard - January 8, 2022
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Tester electric

    Removed the old brushes and replaced new from replacement parts . Worked great thank you.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal