eReplacementParts.com
877-346-4815
Milwaukee Parts
Repair Parts Home  Power Tool Parts  Milwaukee Parts  22-18-2250 Carbon Brush Set

Carbon Brush Set 22-18-2250

OEM part for: Milwaukee

Part Number: 22-18-2250


Install
Videos!
Carbon Brush Set - 22-18-2250:Milwaukee 360 View
Carbon Brush Set - 22-18-2250:MilwaukeeCarbon Brush Set - 22-18-2250:MilwaukeeCarbon Brush Set - 22-18-2250:Milwaukee 360 View
In Stock
Order within the next 3 hours and your part ships today!
Easy 15-30 minutes (8 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Milwaukee replacement part
Includes two Carbon Brushes with wire lead,Brush Spring & Brush Holder.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush Set
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 9 machines

Milwaukee

6117-30 (C91A) 5" HP Angle Grinder With Paddle Switch View Diagrams & Manuals
6117-31 (C92A) 5" HP Angle Grinder With Paddle Switch View Diagrams & Manuals
6117-33 (C94A) 5" HP Angle Grinder With Slide Switch View Diagrams & Manuals
6117-33D (C95A) 5" HP Angle Grinder With Slide Switch View Diagrams & Manuals
6124-30 (C99A) 6" HP Rat-Tail Angle Grinder View Diagrams & Manuals
6124-31 (D01A) 6" HP Rat-Tail Angle Grinder View Diagrams & Manuals
6161-30 (D07A) 6" HP Angle Grinder With Paddle Switch View Diagrams & Manuals
6161-31 (D08A) 6" HP Angle Grinder With Paddle Switch View Diagrams & Manuals
6161-33 (D09A) 6" HP Angle Grinder With Slide Switch View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Grinder Parts

Repair Videos ?

Watch the Repair Video for Carbon Brush Set

Customer Part Reviews ?

5
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Brush replacement on a Milwaukee drill
    Awesome service.
    Joseph - July 26, 2022 Verified Purchase
    OEM PARTS great service
    It's the exact part for my tool
    JOSH - December 29, 2020 Verified Purchase
    Easy fix
    Exact fit part. Fast delivery and easy to deal with
    Guest - April 6, 2020 Verified Purchase
    fantastic
    as expected
    gary - November 4, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Set


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (8 rated repairs)?

    Brushes worn down

    Chris - October 27, 2016
    👍 5 of 5 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Torx driver

    Remove and replace brushes. Easy repair saved a $150 grinder with $5 worth of parts
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Carbon brushes and brackets were broken

    Travis - August 3, 2017
    👍 2 of 3 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Power Drill

    1. Take apart case with Torx bolts. You can leave the grinding head on.
    2. Unplug wires from carbon brush brackets
    3. Unscrew brackets from body of grinder
    4. Replace brackets and brushes, ensuring brush is spring-loaded against armature
    5. Plug wires back in and screw brackets to body
    6. Reassemble case
    Note: check armature for dirtiness and roundness. Out-of-round rotor can cause vibration and fatigue the brushes again. If the armature is damaged, the brush brackets will fail again from the vibration.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brush set were worn and was running sporadically.

    Gary - January 30, 2024
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Torx- two sizes.. long nose pliers, fine sandpaper

    1/ disconnect electrical plug.
    2/ remove Torx screws from handle.
    3/ remove only one side at a time.
    4/ remove the spade connector from the brush holder.
    5/ remove the small Torx that holds the brush & holder,
    6/ remove the old brush set.
    7/ use a fine sandpaper to clean the armature… where the brushes make contact.
    8/ install the new brush set, reinstalling the screw hold down and electrical connection.
    9/ make sure you reroute the wires from where they were originally.
    10/ replace the cover and repeat on the other side.
    11/ screw the handle back together and you’re done!

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Carbon brushes were worn and missing a side plate.

    Scott - May 31, 2022
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, None

    1. Removed one side plate.
    2. Removed carbon brush retaining screw.
    3.Removed worn carbon brushes and replaced new brushes.
    4. Reinstalled retaining screws and side covers and put new labels with grinder info.

    P.S. Don't be worried if you have to bend pieces of the brushes to get them back into place it will not affect the way it runs.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    bad brushes

    mark - March 29, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    replaced brushes
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sparks on armature

    Bill - February 4, 2017
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Pliers, Torx bits

    Remove the brush covers
    Remove the screws and disconnect the old brushes
    Connect the new brushes
    Replace the brush covers
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No power, brushes arcing

    Jeb - September 4, 2016
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, torx driver

    Removed brush covers, removed and replaced carbon brushes and replaced covers
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes were worn out

    Ron - June 30, 2016
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    The split case sprayed all inner parts clean with brake cleaner. Replaced worn brushes reassembled case.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal