eReplacementParts.com
877-346-4815
Milwaukee Parts
Repair Parts Home
  
Power Tool Parts
  
Milwaukee Parts
  22-18-2240 Carbon Brush Assembly

Carbon Brush Assembly 22-18-2240

OEM part for: Milwaukee

Part Number: 22-18-2240


Install
Videos!
Grid squares measure 1x1 inch
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Easy 15-30 minutes (16 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine Milwaukee replacement part. It is sold as a Set of 2.
It includes the brush, brush holder & brush spring.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush Assembly
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 8 machines

Milwaukee

6146-30 (D02A) 4.5" Compact Angle Grinder View Diagrams & Manuals
6121-30 (C96A) 4.5" Compact Rat-Tail Angle Grinder View Diagrams & Manuals
6121-31 (C97A) 4.5" Compact Rat-Tail Angle Grinder View Diagrams & Manuals
6121-31A (C98A) 5" Compact Rat-Tail Angle Grinder View Diagrams & Manuals
6146-31 (D03A) 4.5" Compact Angle Grinder With Paddle Switch View Diagrams & Manuals
6146-33 (D04A) 4.5" Compact Angle Grinder With Slide Switch View Diagrams & Manuals
6147-30 (D05A) 4.5" Compact Angle Grinder With Paddle Switch View Diagrams & Manuals
6147-31 (D06A) 4.5" Compact Angle Grinder With Paddle Switch View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Grinder Parts

Customer Part Reviews ?

4.8
Average Rating (out of 5):
11 Reviews
Click to filter by ratings:
5 stars
10
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Excatly what I needed
    Was an exact replacement for what I needed. Brought my favorite grinder back from the bottom of the tool box.
    Guest - 0 days ago Verified Purchase
    Good quality
    Just what I needed, sturdy, good quality, prompt delivery,
    Guest - November 13, 2023 Verified Purchase
    Easy repair
    Arrive quickly
    iGlobal - February 8, 2023 Verified Purchase
    Exelent
    Exelent
    Guest - April 15, 2021 Verified Purchase
    Exact Match!
    The brushes were an exact match to OEM and installation was a snap. My 4”grinder that stopped working in the middle of a propeller repair works like new again.
    Roy - November 22, 2019 Verified Purchase
    .
    .
    Guest - November 7, 2019 Verified Purchase
    Exactly what I needed.
    Prompt shipping, fairly easy repair thanks to e-replacement parts You-tube instructional video. Quieted the noise some, old brushes were considerably worn. Will definitely use e- replacement parts again.
    Guest - September 13, 2019 Verified Purchase
    Easy repair
    Impact Driver works good as new
    Gregg - September 4, 2019 Verified Purchase
    easy repair, great part,worked as expected
    arrived quickly,perfect fit
    Guest - June 27, 2019 Verified Purchase
    Just what I needed.
    Fit perfectly
    Guest - April 26, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush Assembly


    Will these brushes work in a 6161-30?
    Eric for model number 6161-30 asked on 2022-02-25
    Hello Eric, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 22-18-2250. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
    eReplacementParts Team February 25, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (16 rated repairs)?

    Worn brushes

    maxwell - November 14, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Remove the back handle assembly.
    Take pictures of the internal parts.
    Pull the brush springs back and rest them on the brush holders
    Disconnect the brush terminal and remove the old brushes
    Install the new brushes in the brush holders and lift the springs and put them behind the new brushes.
    Install the back handle assembly
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Armature bearings had failed.

    John - May 10, 2018
    👍 1 of 1 people found this instruction helpful
    1) Removed the side cover screws and split the two halves.
    2) Unscrewed the 4 head screws to remove head.
    3) Unscrewed armature bolt to remove drive gear and release armature.
    4) Replaced armature bearings.
    5) Put armature back in head, install drive gear and retaining nut and grease gears.
    6) Screw down head plate.
    7) Replaced brushes and then refit side covers.
    Then tested.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    not working

    Mark - March 25, 2024
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    replaced the bad parts
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn brushes

    BRIAN - September 8, 2021
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Replaced the brushes
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Would not run

    Andy - October 7, 2020
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1) Remove case
    2) Replace brushes
    3) Put case back together
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn brushes

    Ralph - April 30, 2020
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Removed electronics housing from the gear assembly
    Had already removed the old brush assembly
    Installed new brush assemblies
    Replaced the plastic housing (this took two tries to get wiring in right spot to get a complete closing of the housing)
    Viola: a new grinder
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    switch need replacement

    Linda - April 26, 2020
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Your part came in quickly,made repair fast and easy. Thank you for such excellent service
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Grinder lost power

    steve - October 31, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Put new armature brushes in. very easy. Now works like new again.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    noise , thought it might be brushes

    Bill - September 13, 2019
    Tool Type

    Grinder

    Difficulty

    Medium

    Time

    Less than 15 minutes

    Tools Used

    Pliers, Nutdriver

    Referred to e-replacement parts You-tube video that showed, easy, clear instructions on replacing carbon brush set in my Milwaukee angle grinder. Removed both covers, unplugged old brushes that were were worn considerably upon inspection and replaced. The video was a huge help.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    grinder needed new brushes

    Deborah - January 6, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver

    took off cover and replaced old with new
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal