eReplacementParts.com
877-346-4815
Milwaukee Parts
Repair Parts Home
  
Power Tool Parts
  
Milwaukee Parts
  22-18-0926 Carbon Brush

Carbon Brush 22-18-0926

OEM part for: Milwaukee

Part Number: 22-18-0926


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 1 hour and your part ships today!
Medium Less than 15 minutes (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Milwaukee replacement part
Includes 1 Carbon Brush with wire lead and brush spring attached.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 18 machines

Milwaukee

6521-50 (SER 326A) Sawzall View Diagrams & Manuals
6521-21 (SER 981A) Sawzall View Diagrams & Manuals
6521-21 (SER 981B) Sawzall View Diagrams & Manuals
6521-21 (SER 981C) Sawzall View Diagrams & Manuals
6509-20 (SER A17A) Sawzall View Diagrams & Manuals
6509-20 (SER A17B) Sawzall View Diagrams & Manuals
6509-20 (SER A17C) Sawzall View Diagrams & Manuals
6509-20 (SER A17D) Sawzall View Diagrams & Manuals
6509-20 (SER A17E) Sawzall View Diagrams & Manuals
6509-22 (SER A17A) Sawzall View Diagrams & Manuals
6509-22 (SER A17B) Sawzall View Diagrams & Manuals
6509-22 (SER A17C) Sawzall View Diagrams & Manuals
6509-22 (SER A17D) Sawzall View Diagrams & Manuals
6509-22 (SER A17E) Sawzall View Diagrams & Manuals
6519-22 (SER A18A) Sawzall View Diagrams & Manuals
6519-22 (SER A18B) Sawzall View Diagrams & Manuals
6519-22 (SER A18C) Sawzall View Diagrams & Manuals
6519-22 (SER A18D) Sawzall View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Saw Parts

Repair Videos ?

Watch the Repair Video for Carbon Brush

Customer Part Reviews ?

4.8
Average Rating (out of 5):
6 Reviews
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easily repaired
    Fast service
    Guest - April 21, 2022 Verified Purchase
    Time for new brushes.
    New brushes, still not in sawzall....after ordering parts, I took the old brushes out blew them off, turned them around and the Sawzall is doin' its thing again...have new brushes ready when needed. ereplacement parts as always supplied what I needed, great service !
    Peter - March 24, 2022 Verified Purchase
    Brushes needed to be replaced
    Easy repair take the caps off, pull out the old brushes and put the new ones in, it was that simple.
    Guest - March 25, 2021 Verified Purchase
    Quick and Easy
    Awesome site! The best thing is the photos showing exactly what the part is.
    Guest - January 10, 2020 Verified Purchase
    works great
    As indicated
    Guest - November 11, 2019 Verified Purchase
    Trigger
    I was kind of disappointed that I had to buy two separate brushes versus a pack of two still can’t get the sauce all the words may need a new trigger
    Guest - August 26, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium Less than 15 minutes (3 rated repairs)?

    Brushes where bad

    Lanny - July 10, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Replaced the brushes and the holder caps.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes wore down

    Jay - June 21, 2017
    Tool Type

    Sander

    Difficulty

    Hard

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    I used a screwdriver to pry off the cap and removed the worn brush. Insert new brush and reinstall the cap.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes over heated and melted assembly.

    Todd - November 17, 2017
    👍 0 of 1 people found this instruction helpful
    Tool Type

    Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Torx bits

    1. Removed brush housing plugs that hold brushes in place.
    2. Removed damaged brushes.
    3. Unscrewed handle housing.
    4. Separated two halves of handle.
    5. Unscrewed 2 screws on brush assembly housing.
    6. Unplugged 4 wire connections attached to motor and to additional 2 wires with leads to brush holder assembly.
    7. Removed brush housing.
    8. Installed new housing.
    9. Attached 2 wires to the brush holder assembly same way removed..
    10. Screwed the 2 screws back into housing.
    11. Replugged wires to moter.
    12. Assembled 2 haves of handle.
    13. Rescrewed handle screws.
    14. Installed new brushes.
    15. Reinstalled 2 caps for brushes.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal