Cable Sleeve 344100970

Description:

This cord protector is a genuine Metabo replacement part and is sold individually.
Cord Protectors are designed to slide onto your cord and fit securely at the end, where it’s firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

Frequently Purchased With

Cord Set
$20.72

Carbon Brush S..
$13.79

Switch
$13.79

Carbon Brush S..
$15.47

Clamping Nut
$27.47

Switch
$13.79

Ball Bearing
$3.99

Compatibility

This part is compatible with the following machines:

Metabo

Expand the 83 compatible machines

Products Compatibility

This item works with the following types of products:

• Circular Saw
• Drill
• Electric Drill
• Grinder
• Hedge Trimmer
• Polisher
• Rotary Hammer
• Sander
• Saw
• Trimmer

Expand List

Repair Instructions: Submitted by Customers Like You

Tool Type:

Grinder

Parts Used:

Cable Sleeve - 344100970

Compensating Washer - 339060160

Motor Housing - 315012630

Flange Complete - 343377210

Metabo Label 99,tr1 - 338122160

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver

Toll was droped аrom a height.

It was easy.
I followed drawing for angle grander.
Step by step I fixed all problems with tool.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Grinder

Parts Used:

Cable Sleeve - 344100970

Cord Set - 344492750

Switch Trigger, Screws Not Inc - 343431170

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Bad cord and faulty switch.

Removed screws from housing
disconnected cord from switch
disconnected witch from internal wiring
reconnected cord to switch
reconnected switch to internal wiring
screwed the switch and cord back into place
screwed housing back together

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Grinder

Parts Used:

Cable Sleeve - 344100970

Cord Set - 344492750

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, soldering iron

old cord cracked and peeling

1. remove the switch cover 2.loosen the screws on the switch and remove the old cord 3.cut wires to length 4. strip and solder the tip of each wire 5.insert the wires into the switch and tighten the screws 6.put the cover back on ...done

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Grinder

Parts Used:

Cable Sleeve - 344100970

Cord Set - 344492750

Carbon Brush Set Cut-off - 316046900

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, Torx wrench, plier and wire stripper cripper.

Power cord jacket starting to crack open.

Took the covers off just the half on my grinder, blew out all the fine dust accumulation in the housing with air compressor and replace the power cord and brushes, now its is as good as new almost.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Grinder

Parts Used:

Cable Sleeve - 344100970

Cord Set - 344492750

Carbon Brush Set Cut-off - 316046900

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Torx

Damaged power cord

1. Disassemble case
2. Replace brushes
3. Solder wire ends on new power cord
4. Test run
5. Check for voltage "leakage" from tool body with multi-meter

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

1 Reviews

Click to filter by ratings:

5 stars

1

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Easy to find and easy to purchase and fast delivery

Great

Guest - March 30, 2023 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Cable Sleeve