Easy
30-60 minutes
This is a genuine item that is supplied by the original equipment manufacturer for use with Black and Decker and DeWALT lawn mowers. It is an identical replacement for a missing or damaged cable and plug assembly that was original equipment, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality rubber insulated item is sold individually.
Cable And Plug 243518-02SV
OEM part for: DeWALT, Black and Decker
Part Number: 243518-02SV
$40.75
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 5 machines
Black and Decker
MM875 Type 1 19" Electric LAWNHOG&trade Mulching Mower with Rear-Bag View Diagrams & Manuals
MM875 Type 2 19" Electric LAWNHOG&trade Mulching Mower with Rear-Bag View Diagrams & Manuals
MM1800 Type 1 18 Inch Mulching Mower View Diagrams & Manuals
MM875 Type 3 19 Mulching Mower View Diagrams & Manuals
MM1800 (Type 2) Diamond Core Drill Power Tool View Diagrams & Manuals
This item works with the following types of products:
- Lawn Mower Parts
This part replaces obsolete part #: 243518-02
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair
This was the exact part needed and arrived in good time. Lawnmower is working again.
Kenneth -
October 1, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cable And Plug
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Lawn Mower Cord and Shunt Brushes bad
Daniel - April 3, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Take all screws out of the mower deck
Take the handle off
Remove mower deck
Unscrew the shunted brush cap replace shunt brush with the one on the new cord.
do one at a time.so you don't put them mix them up screw the cap back on.
Remove the cord ends by the wire color and replace with the same wire color
remove the cord clamp screw put new cord in clamp put screw back in
Put mower deck in place ensure the cord is in the slot where it goes though the deck
Remove all the screws from the switch housing cover on handle remove from the handle
replace all the wires going to the switch do the same as replace each cord wire by color on the switch put the switch housing cover back on handle with the screws
Put the handle back on the mower and put the deck screws back in
Plug in to test the the mower to see if it works it should
job complete now go mow the lawn if needed
Take the handle off
Remove mower deck
Unscrew the shunted brush cap replace shunt brush with the one on the new cord.
do one at a time.so you don't put them mix them up screw the cap back on.
Remove the cord ends by the wire color and replace with the same wire color
remove the cord clamp screw put new cord in clamp put screw back in
Put mower deck in place ensure the cord is in the slot where it goes though the deck
Remove all the screws from the switch housing cover on handle remove from the handle
replace all the wires going to the switch do the same as replace each cord wire by color on the switch put the switch housing cover back on handle with the screws
Put the handle back on the mower and put the deck screws back in
Plug in to test the the mower to see if it works it should
job complete now go mow the lawn if needed
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Black and Decker electric lawn mower male power cord plug connector broke which required replacing entire wiring harness.
Dennis - October 25, 2017
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Found YouTube video showing how to remove motor cover replace wiring harness. Much easier than I expected. Saved me having to purchase a new mower.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
