eReplacementParts.com
877-346-4815
Ryobi Parts
Repair Parts Home  Power Tool Parts  Ryobi Parts  0502025007 Carbon Brush

Install
Videos!
Carbon Brush - 0502025007:Ryobi 360 View
Carbon Brush - 0502025007:RyobiCarbon Brush - 0502025007:RyobiCarbon Brush - 0502025007:Ryobi 360 View

Carbon Brush 0502025007

Part Number: 0502025007
RyobiRidgid
Availability: Usually ships in 7 - 12 business days
Price: $5.38
Leaves our warehouse within
7 - 12 business days

*This part replaces obsolete part #: 089110102254.

Product Information
Specifications
  • Dimension: 7 X 17 X 19/17
Description:
This is a Genuine Manufacturer Sourced replacement part. This is a Carbon Brush with Lead Wire attached and a Spring. This Brush is Sold Individually. Please note Brush Holder is Sold Separately.

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time.

You would need a Screwdriver and Pliers to complete this job.
Frequently Purchased With
Products Compatibility

This item works with the following types of products:

  • • Saw
  • • Table Saw

Questions & Answers for Carbon Brush


Does the motor brushes come in a set?
Charles asked on 2023-03-20
Hello Charles, Thank you for your inquiry. According to the part description under the part information, this brush is sold individually. We hope this helps you.
eReplacementParts Team March 20, 2023
Are these three correct brushes for my rigid R4513 table saw motor? My saw will not start. It instantly trips the breaker when turned on. I'm assuming it has a bad motor. Think these will fix it?
Justin for model number Rigid R4513 asked on 2022-07-17
Hello Justin, thank you for your question. We can confirm that this brush 0502025007 is the correct one for your Rigid model R4513. However, we cannot confirm that the brushes will fix the issue. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the unit directly. Good luck with your repair.
eReplacementParts Team July 17, 2022
Motor table saw
Samuel for model number R4513 asked on 2022-04-25
Hello Samuel, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 089290001716. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team April 25, 2022
Repair Instructions: Submitted by Customers Like You
5 of 5 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Leg End Plug - 0121010213
Carbon Brush - 0502025007
Switch Assembly - 089110109712
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Switch failed, leg foot worn. Brushes for preventive maintenamce
Remove the four screws from the switch and pull it out far enough to exchange the wires on the back.
Tap the leg plugs in with a mallet
Remove the brush caps
Remove the old brushes
Install the new brushes
Screw the brush caps back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 0502025007
Push Stick - 089290001079
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn brushes, lost my pusher
Removed the brush cap from the motor housing
Removed the old brushes
Installed the new brushes
Replace the brush caps
Push stick will be used when needed
It only took me 3-4 min to replace the parts. 100% original, fast shipping. Will buy all my parts from these guys
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Brush Tube - 0121010231
Carbon Brush - 0502025007
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Mallet to tap in brush tubes
Table saw would not come on. Power switch tested good.
1. Unplug power
2. Remove saw blade
3. Tilt saw with power switch up
4. Remove backing off power switch
5. Remove cable clamps and green ground wires. This will help in access the connector easier.
6. Unplug connectors from the motor to the power switch
7. Remove motor bracket mounting bolts
8. Remove black brush caps and pull out brushes. Replace if necessary. Put everything back together and verify problem solved. If your brush tubes are melted you will need to continue.
9. Remove 4 screws from motor housing.
10. Pull motor out
11. Remove 2 screws which holds the black plastic bracket and remove bracket.
12. Remove coil pack. Disconnect black and white wires from brush tube. Set coil pack down.
13. Remove old brush tube by tapping the back side. They come out through the top. I used a pry bar, gave it a few taps, then used a flat tip to remove it. Remember the position of the electrical connector.
Note: My new brush tubes came with the electrical connector straight. You will have to bend them 90 deg AFTER you install them.
14. Install new brush tube exactly how it came out. Tube electrical connector should be towards the inside Tap with mallet.
15. Use needle nose pliers to bend tube connector 90 deg. Use same pliers to connect black and white wires. DO NOT INSTALL new brushes until you install the motor first.
16. Install coil pack and black plastic bracket secure with 2 screws. Make sure you have enough slack on your green ground wire.
17. Install motor. Tap with mallet. Then turn more and look inside motor housing to make sure the spinning motor doesn't touch brush tube wire or connector. If it does, bend tube connector until it is clear of the motor.
18. If motor spins freely, install 4 motor screws and green ground wire.
19. Install new brushing and black caps.
20. Put back together and verify problem solved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 0502025007
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Table saw wouldn't start. Just brief click after flipping start switch.
Unscrewed retaining caps on each side of motor housing, inserted new brushes, and reinstalled caps. (Please note that this review is for a normal repair. Unfortunately, the slot for the replacement brush on one side of my Rigid table saw was slightly undersized, and my brush would not fit into it, which turned an extremely simple repair into a somewhat daunting task which I have not yet fully completed. This is NOT the fault of the ereplacement parts, but of the table saw itself.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 0502025007
Brush Cap - 089110113126
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes broken
The repair went very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Brush Tube - 0121010231
Carbon Brush - 0502025007
Armature Assembly - 089037012712
Arbor Assembly - A134010503
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Allen Wrench
Worn Helical Gear on Craftsman Table Saw (Model # 315.218060) (Mfg by Ryobi Model # BTS-21)
1. Remove six external screws
2. Carefully remove gearbox assembly
3. Remove Arbor Assembly from Gearbox
4. Remove Brushes
5. Remove Armature assembly
6. To remove Brush Holders - Loosen two Allen screws on the rear of the motor housing and with long Needle Nose Pliers remove Spade Connectors inside the housing. They will then slide out.
Now to reassemble
Reverse order
When re-assembling Gearbox remember to grease gears liberally. I used Lucas Heavy Duty Grease 10301-1
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 0502025007
Ball Bearing - 089110113136
Ball Bearing (6200 Zz C3,srl/p - 089290001513
Ball Bearing (6201 Zlu C3,srl/ - 089110101209
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Bearing puller
Bearings bad on my table saw motor
Removed motor cracked open pulled apart cleaned replaced bearings and brushes, re assemble works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 0502025007
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Motor would not operate at all.
I had to remove the motor for the gear box to remove the old brushes because 1 brush was stuck and came apart. It just happened to be the one thats a bit harder to get to, of course. Only 4 screws and it came right off. I had to use a flat head screw driver to losses the brush then pliers to remove it. Put the new brushes in. Which fit perfectly. Replaced the caps. Put the motor back onto the gear box. Started right up and has been working fine ever since. Was extremely happy with the brushes and the customer support received from ereplacementparts.com. I highly recommend them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 0502025007
Brush Cap - 0121010238
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Stubby slotted screwdriver
Brush cap vibrated loose and disappeared. And brushes were worn out.
I put the table saw on its side to gain access to the motor. Using a stubby screwdriver I removed the remaining brush cap, pulled out the brushes and replaced them. The saw works like new. Thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Table Saw
Parts Used:
Carbon Brush - 0502025007
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Tester electric
Motor was skipping
Removed the old brushes and replaced new from replacement parts . Worked great thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.9
Average Rating (out of 5):
7 Reviews
Click to filter by ratings:
5 stars
6
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Excellent parts
    Parts and the prompt service were great
    Al - March 23, 2022 Verified Purchase
    All good
    Very happy with price and prompt delivery
    iGlobal - June 10, 2021 Verified Purchase
    Saw parts
    I ordered several parts for my table saw, online parts listing was spot on all shipped very timely
    Guest - April 20, 2021 Verified Purchase
    Hard repair but, all the parts I needed
    Easy to find the right parts for my table saw. Parts came quick, bagged, and labeled. Couldn't be happier with this site. I'm so glad I found it.
    mike - February 25, 2021 Verified Purchase
    Quick fix, saved hundreds
    The brushes I ordered. Came in quick and worked perfectly. I was told by tool repair shop just buy new table saw , two little brushes saved me about 400 bucks thanks e- replacement
    Guest - February 22, 2020 Verified Purchase
    Easy fix
    My saw had some damaged ones replace them in line 2 min
    Guest - September 7, 2019 Verified Purchase
    Easy fix
    Excellent condition
    Guest - June 28, 2023 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal