eReplacementParts.com
877-346-4815
DeWALT Parts
Repair Parts Home
  
Power Tool Parts
  
DeWALT Parts
  614367-00 Carbon Brush

Carbon Brush 614367-00

OEM part for: DeWALT

Part Number: 614367-00


Install
Videos!
Grid squares measure 1x1 inch
Carbon Brush - 614367-00:DeWALTCarbon Brush - 614367-00:DeWALT
In Stock
Order within the next 11 hours and your part ships today!
Easy 15-30 minutes (19 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALT
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Dewalt replacement part
This brush is sold individually, 2 are needed for the tools shown below
It is always best to replace both brushes, even if only one is worn.

Worn brushes frequently are the cause behind a motor running poorly.
Replacing brushes can fix a motor that’s operating intermittently.
New brushes can restore a motor’s electric braking.

Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • This item is sold individually.
  • Classification: Part
  • Weight: 0.05 lbs.
  • Also Known As: Motor Brush
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 37 machines

DeWALT

DW703 Type 3 10 Inch Compound Miter Saw View Diagrams & Manuals
D24000 Type 1 Wet Tile Saw View Diagrams & Manuals
D24000S Type 1 Wet Tile Saw View Diagrams & Manuals
DW713 10 Miter Saw View Diagrams & Manuals
D24000 Type 2 Wet Tile Saw View Diagrams & Manuals
DW715 Type 3 Miter Saw View Diagrams & Manuals
DW716 Type 20 12" Miter Saw View Diagrams & Manuals
DWS782 (Type 20) 12" Double Bevel Sliding Compound Miter Saw View Diagrams & Manuals
DWS709 (Type 20) 12in Bevel Miter Saw View Diagrams & Manuals
DW715-B3 (Type 3) 12 Miter Saw View Diagrams & Manuals
DWS779 (Type 20) 12in Doubl Bevel Saw View Diagrams & Manuals
DW716XPS (Type 20) 12-In. Miter Saw View Diagrams & Manuals
DW703-B3 (Type 3) 10 Compound Mitre Saw Power Tool View Diagrams & Manuals
DW703-BR (Type 3) 10 Miter Saw Power Tool View Diagrams & Manuals
DW713-B3 (Type 1) Mitre Saw Power Tool View Diagrams & Manuals
DW713-B3 (Type 2) Mitre Saw Power Tool View Diagrams & Manuals
DW713-BR (Type 1) Mitre Saw Power Tool View Diagrams & Manuals
DW713-BR (Type 2) Mitre Saw Power Tool View Diagrams & Manuals
DW713 (Type 1) Mitre Saw Power Tool View Diagrams & Manuals
DW713 (Type 2) Mitre Saw Power Tool View Diagrams & Manuals
DW715-BR (Type 3) Mitre Saw Power Tool View Diagrams & Manuals
DWS713-AR (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS713-B2 (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS713-B3 (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS713-BR (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS713 (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS715-AR (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS715-B2 (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS715-B3 (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS715-BR (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS715 (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS716 (Type 20) 15a 12in Db Miter Saw Power Tool View Diagrams & Manuals
DWS716XPS (Type 20) 15a 12in Db Miter Saw Power Tool View Diagrams & Manuals
DWS779 (Type 21) 12in Doubl Bevel Saw Power Tool View Diagrams & Manuals
DWS779 (Type 22) 12in Doubl Bevel Saw Power Tool View Diagrams & Manuals
DWS780 (Type 20) Mitre Saw Power Tool View Diagrams & Manuals
DWS780 (Type 21) Mitre Saw Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Miter Saw Parts
  • Saw Parts
  • Tile Saw Parts

This part replaces obsolete part #: , 5140024-30

Repair Videos ?

Watch the Repair Video for Carbon Brush
Articles:
Step-by-step instructions for removing and installing the carbon brushes on your DeWALT miter saw....
June 12, 2018

Customer Part Reviews ?

4.5
Average Rating (out of 5):
15 Reviews
Click to filter by ratings:
5 stars
11
4 stars
2
3 stars
1
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Looks great
    I only bought these as backup because I had to order other parts but they look well made. I will update when I have to use them.
    Brandon - August 22, 2023 Verified Purchase
    Easy repair!
    Quick service! Saw is running like new!
    Guest - May 26, 2023 Verified Purchase
    Prompt delivery
    Brushes for Dewalt miter saw.
    Guest - May 18, 2022 Verified Purchase
    Hassle free
    Exactly what I needed
    Guest - April 27, 2021 Verified Purchase
    Easy Fix!
    Part was as shown and installation was simple. Easy to order and shipping was fast.
    Guest - April 29, 2020 Verified Purchase
    Carbon Brush replacement
    I liked the way the website is laid out. It's easy find and to navigate to the parts you need.
    Guest - February 20, 2020 Verified Purchase
    👍👍👍👍👍
    Your page is very good I appreciate it very much I recommend this page 100% 
    Jesus - December 12, 2019 Verified Purchase
    right part
    work as it should
    michael - October 17, 2019 Verified Purchase
    Great part
    It's working perfectly.
    Guest - October 10, 2019 Verified Purchase
    Everything I needed
    Bought belt and brushes, like a new saw. Thanks
    Guest - September 10, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (19 rated repairs)?

    Brushes wore out.

    March - June 5, 2017
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers

    1. Removed cover.
    2. Replaced brushes.
    3. Reattached cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes wore out.

    Randy - April 23, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Unplugged the saw from the outlet.
    2. Unscrewed the brush cover screws.
    3. Removed the old brushes.
    4. Installed the new ones.
    5. Screwed the covers back on.
    6. Plugged back in.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brush wore out

    Kevin - September 12, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Remove trim cover
    2. Remove cover screw
    3. Slide old brush out
    4. Slide new one in
    5. Re-assemble
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Tile saw wouldn't start consistently

    Allen - February 9, 2016
    👍 3 of 5 people found this instruction helpful
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Replaced brushes, $12.00 + 15 min. work restored $1000. saw to perfect operation. Proper P.M. would save a lot of power tools from being ruined and scraped. All you need to do is use a screwdriver to remove the brush caps. Then remove the old brushes and install the new ones, then just replace the brush caps. Your done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Stop running

    Andrew - May 27, 2023
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Unscrewed cover , took out the brush and replaced with the new one and screwed the cover back on!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    brushes were bad

    Ronald - May 18, 2023
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    removed bad brushes and replaced them with the new ones
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The wet tile saw unable to turn on due to carbon brush was worn

    Luan - March 3, 2023
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Power Drill

    - Locate the carbon brush and replace them
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Tile saw stop turning on.

    Greg - March 28, 2022
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, None

    Replaced the carbon brushes in 5 minutes. Take out the bush housing screws on the front and back of the motor remove old brushes put in new ones your done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Motor would not start up

    Josh - March 26, 2020
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    took off end cap, unscrewed the brush caps and changed them out. Simple install and great working part. This is the 2nd time I have done this repair as well as the brake/trigger switch. We use this saw 8 hours a day 5 days a week so they burn up rather quickly.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Braking action no longer working

    William - February 22, 2020
    Tool Type

    Miter Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, star screw drive

    When the trigger was let go, the blade took too long to stop spinning. Also, you will be able to see thru the end cap a lot of sparking on the armature while the motor is running It was a give away that the brushes were worn out. I ordered the parts from Ereplacement. Shipping was fast. All it took was a screw driver to reveal the spring end of the brush. Gently tug on the base and the spring slides out. When you compare the old brush size (about 1/4" in length) vs the new brush ( 3/4" in length) you can tell it's worn to the point that it needs replaced. Gently guide the brush into the slot, push down on the spring, then replace the plastic cap. There are 2 brushes,one on each side of the armature. You need to replace both brushes.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal