Genuine Manufacturer Sourced replacement part. This item is made out of Carbon with a Lead Wire attached. This item includes One (1) Carbon Brush per order. It is recommended to replace both Carbon Brushes when replacing one. Please note Brush Holder and Spring are Sold Separately.
Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Brush 384719-01
OEM part for: DeWALT, Black and Decker
Part Number: 384719-01
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 41 machines
DeWALT
Black and Decker
This item works with the following types of products:
- Saw Parts
- Reciprocating Saw Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Started sparkling, New buy the age, Time to replace brushes
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, T25, Needle nose pliers, Flat tuner screwdriver
Parts Used
Not enough room so removed handle right side,
Disconnect wire terminal first needle nose,
Then use tuner screwdriver to hold spring back, remove old brush replace with new, let spring release back in place..
Flip it over same thing on other side, (Always replace both brushes)
Helpful Hint: Always buy 3 brushes, 1 extra in case wire breaks..
Brushes are worn
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Burning when motor was running
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Saw wouldn't work, brushes worn out
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Needle nose pliers
Parts Used
Disconnected the brushes
Pulled back the brush springs and rested them on the brush holder
Removed the old brushes
Installed the new brushes
Placed the brush springs behind them
Connected the new brushes
Installed the brush doors
Brushes were stuck...
Tool Type
Reciprocating Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Needle nose pliers
Parts Used
Disconnected the old brushes and removed
Installed the new brushes
Replaced the brush doors
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.