eReplacementParts.com
877-346-4815
Milwaukee Parts
Repair Parts Home
  
Power Tool Parts
  
Milwaukee Parts
  22-20-0535 Brush Holder Assembly

Brush Holder Assembly 22-20-0535

OEM part for: Milwaukee

Part Number: 22-20-0535


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 5 hours and your part ships today!
Easy 15-30 minutes (2 rated repairs)?
OEM: Original Equipment Manufacturer ?
Milwaukee
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine Milwaukee replacement part, it is sold individually.
2 are needed for the tools shown below.
It includes the Brush and Brush Holder.
It is always best to replace both brushes, even if only one is worn.

Worn brushes frequently are the cause behind a motor running poorly.
Replacing brushes can fix a motor that’s operating intermittently.
New brushes can restore a motor’s electric braking.

Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 1 machine

Milwaukee

6538-21 (SER B36A) 1-1/4" Stroke Sawzall View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Saw Parts

Customer Part Reviews ?

5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Fit perfect and worked as should
    Arrived in timely manner
    Guest - March 30, 2023 Verified Purchase
    Great Website
    Ordered many parts off of this website, its always easy to find and reasonably priced.
    Guest - January 7, 2021 Verified Purchase
    Brushes were not the problem but they came correct and the price was very fair.quality was good and shipped fast.
    Brushes and holder for my Milwaukee 15amp saws all
    Guest - October 24, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Brush Holder Assembly


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (2 rated repairs)?

    Milwaukee Sawzall Brushes arcing excessively.

    Alan - October 6, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Back Handle Cover removed.
    Brush Housing cable disconnected on both Brush Housings.
    Removed Brush Housing.
    Replaced Brush Housing with new ones.
    Re-cabled to both Brush Housing.
    Back Handle Cover put back.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn brushes shoe guard missing

    robin - March 24, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Reciprocating Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Wrench Set, Nutdriver

    Remove one half of the handle, Disconnect the brush holder and brush assemblies , then remove them. Install the new brush holder and brushes, and then attach the handle. Then just slip the shoe in the front of the saw and lock it.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal