Easy
Less than 15 minutes
This is a genuine OEM sourced replacement part designed for use with Ridgid planer. This assembly includes one (1) carbon brush with a lead wire and a spring attached.
Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type.
You would need a screwdriver to complete this job.
• Make sure the unit is unplugged
• First remove the brush caps
• Take our old brushes and replace them with the new ones
• Secure brush caps and test the tool
Brush Assembly 089170109183
OEM part for: Ridgid, Ryobi
Part Number: 089170109183
$8.16
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.02 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Ridgid
R4331 13 In. Thickness Planer View Diagrams & Manuals
Ryobi
AP1305 Ap1305 12-1/2 In. Thickness Planer 2-24-21 (Rev:01) View Diagrams & Manuals
This item works with the following types of products:
- Planer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
outstanding business, quick and accurate.
Brushes are just as described. I have not installed but have used them before. Arrived quickly and good org. to deal with. Highly recommend them.
Guest -
February 15, 2021
Verified Purchase
Exact replacement
These parts arrived quickly and fit perfectly. Operation of my thickness planer has been restored.
Guest -
November 17, 2020
Verified Purchase
Was not used for the repair
Item was not needed after all it was the actual motor was bad.
DAVID -
April 23, 2020
Verified Purchase
worked as expected
arrived as was told, arrived in workable condition,good packaging...
Guest -
September 9, 2019
Verified Purchase
Replacement brushes
Arrived on time, had to sand them down to fit but they are working well.
Thank you.
Guest -
October 4, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Brushes were badly burned from arcing.
harry - December 20, 2015
👍 8 of 9 people found this instruction helpful
Tool Type
Planer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, file
Parts Used
The brush for the Rigid model planer I have are no longer available. The brushes ordered were very slightly over sized. I filed the brushes down to where they easily slid into the machine. The planer works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Brushes worn out
Michael - April 27, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Planer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Flat smooth file
Parts Used
Removed screw cap for brushes removed old brushes cleaned out socket with can air, installed brushes. One had to be filed so I used a flat file and lightly rubbed the brush material on all sides until it fit back in the socket. I used the old set as a guide to get the proper size. Once reassembled I plugged the planer in and it worked fine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Planer was gouging boards
Neal - June 15, 2023
Tool Type
Planer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Replaced brushes, one broken brush cap and 2 pan head screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Brushes worn out and 1 cap broke
James - October 1, 2021
Tool Type
Planer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed caps, removed brushes, cleaned Armature, replaced brushes and caps...runs like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Had issues with the motor, thought it might be the brushes, it wasnt... motor is dead
Brian - June 3, 2020
Tool Type
Planer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed brush caps pulled out old brushes put in new brushes replaced caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Over heated motor caused brush to breakup and damage armature and brush holder.
Clarence - October 22, 2018
Tool Type
Planer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Adjustable Wrench, Allen wrench
1 Removed housing.
2 Removed armature.
3 Disconnected field leads from brush holders
4 Loosened set screw and slid out brush holder
5 Installed new brush holder and connected field lead
6 Installed bearings on new armature
7 Installed armature
8 Installed housing and brushes
2 Removed armature.
3 Disconnected field leads from brush holders
4 Loosened set screw and slid out brush holder
5 Installed new brush holder and connected field lead
6 Installed bearings on new armature
7 Installed armature
8 Installed housing and brushes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old brushes wore out from normal use, needed replacements
Jason - August 23, 2018
Tool Type
Planer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Unscrewed plastic cap/cover on each side. Removed old brushes. Inserted new brushes. Replaced caps. Started motor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
