eReplacementParts.com
877-346-4815
Porter Cable Parts
Repair Parts Home
  
Power Tool Parts
  
Porter Cable Parts
  N778654 Carbon Brush With Spring

Carbon Brush With Spring N778654

OEM part for: Porter Cable, DeWALT

Part Number: N778654


Install
Videos!
Carbon Brush With Spring - N778654:Porter Cable 360 View
Carbon Brush With Spring - N778654:Porter CableCarbon Brush With Spring - N778654:Porter CableCarbon Brush With Spring - N778654:Porter Cable 360 View
In Stock
Order within the next 8 hours and your part ships today!
Easy Less than 15 minutes (10 rated repairs)?
OEM: Original Equipment Manufacturer ?
Porter CableDeWALT
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Porter Cable replacement part
This brush is sold individually, 2 are needed for the tools shown below
It is always best to replace both brushes, even if only one is worn.

Worn brushes frequently are the cause behind a motor running poorly.
Replacing brushes can fix a motor that’s operating intermittently.
New brushes can restore a motor’s electric braking.

Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 22 machines

Porter Cable

352 Type 4 3x21 Belt Sander View Diagrams & Manuals
352 Type 5 3x21 Belt Sander View Diagrams & Manuals
352VS Type 4 3x21 Variable Speed Belt Sander View Diagrams & Manuals
352VS Type 5 3x21 Variable Speed Belt Sander View Diagrams & Manuals
352VS Type 6 3x21 Variable Speed Belt Sander View Diagrams & Manuals
351 Type 4 3x21 Belt Sander View Diagrams & Manuals
351 Type 5 3x21 Belt Sander View Diagrams & Manuals
352VS Type 7 3x21 Variable Speed Belt Sander View Diagrams & Manuals
J-351 (Type 5) Belt Sander 3x21 View Diagrams & Manuals
J-351 (Type 4) Belt Sander 3x21 View Diagrams & Manuals
352VS (Type 8) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals

DeWALT

DWP352VS (Type 1) 3x21 Belt Sander View Diagrams & Manuals
DWP352VS-AR (Type 1) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-AR (Type 2) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-B2 (Type 1) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-B2 (Type 2) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-B2C (Type 1) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-B2C (Type 2) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-B3 (Type 1) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-B3 (Type 2) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-BR (Type 1) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
DWP352VS-BR (Type 2) 3x21 Vs Belt Sander Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Sander Parts

This part replaces obsolete part #: N030461, 892555, 887717

Repair Videos ?

Watch the Repair Video for Carbon Brush With Spring
Articles:
Step-by-step instructions show you how to quickly replace the motor brushes on a porter cable belt sander....
February 09, 2015

Customer Part Reviews ?

5
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great service
    Easy to find parts and fast shipping
    Guest - September 4, 2021 Verified Purchase
    Excellent
    Exactly what I need to fix my sander
    Guest - April 14, 2021 Verified Purchase
    worked as expected
    my belt sanded is working great again thx.
    donald - June 29, 2020 Verified Purchase
    Easy repair
    The fix was easy with these great parts
    Guest - October 28, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush With Spring


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (10 rated repairs)?

    Sander emitted sparks and stopped workong.

    Cliff - March 25, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Removed belt cover
    2. Removed caps covering motor brushes.
    3. Removed old brushes
    4. Replaced brushes with new ones.
    5. Reinstalled belt cover

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Low power due to worn carbon brushes

    Lee - April 15, 2021
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Using Philip’s head screwdriver removed side cover.
    2. Using a flat head screwdriver remove brush covers.
    3. Extract old brushes.
    4. Insert new brushes.
    5. Replace brush covers.
    6. Replace side cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes were worn.

    Daniel - March 15, 2021
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    . Removed the cover and put them in.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Carbon brushes burnt.

    Jeffrey - February 7, 2021
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed cover.
    Removed brush plugs.
    Replaced brushes.
    Replaced plugs.
    Replaced cover.
    Easy!!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sander started throwing a lot of sparks then quit completely.

    Wayne - December 17, 2019
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Flat file. Had to file down one of the brushes a little.

    Removed side cover plate screws(4).
    Removed motor brush retaining plug
    Removed old brush, one side at a time
    Clean out any residue from brush holder
    Install new brush with spring carefully keeping all straight. Put the threaded cap/retainer plug in with flat blade screwdriver.
    Reinstall side cover
    Plug sander into power supply
    Tested sander- worked like new!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    worn brushes

    Jo - August 12, 2019
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    removed cap and brushes.
    replaced same.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Motor would not operate.

    Miguel - March 26, 2019
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    One of the brushes was worn out so I replaced both and replaced the brush holder that was corroded. All that had to be removed was the motor housing by taking out three screws.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    REPLACE ROLLER BEARING AND BRUSHES

    runo - February 22, 2019
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, DRILL PRESS,HAMMER, DRILLS

    DRILLED SANDER CASTING TO BE ABLE TO PRESS OUT BAD BEARING
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    One sander stopped working after sparking, the other started running slow.

    Richard - September 3, 2016
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Removed cover.
    2. Removed brush housing.
    3. Removed brushes.
    4. Installed new brushes.
    5. Installed housing.
    6. Installed cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sparking at motor

    mike - April 5, 2016
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the brush caps with a screw driver, then removed the old brushes. I then installed the new brushes and replaced the the brush caps. Sander works like new.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal