eReplacementParts.com
877-346-4815
DeWALT Parts
Repair Parts Home
  
Power Tool Parts
  
DeWALT Parts
  400814-00 Carbon Brush

Carbon Brush 400814-00

OEM part for: DeWALT, Black and Decker

Part Number: 400814-00


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 34 minutes and your part ships today!
Easy Less than 15 minutes (3 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALTBlack and Decker
Does this d-block d-md-none fit my product?

Product Description ?

Genuine Dewalt/Black & Decker replacement part.
includes 1 Carbon Brush with wire lead and brush spring attached.
2 Brushes are needed for the tools listed below.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 30 machines

DeWALT

DW157 Type 1 Magnetic Drill Press View Diagrams & Manuals
DW131-95 Type 1 Electric Drill View Diagrams & Manuals
DW131 Type 1 1/2 Electric Drill View Diagrams & Manuals
DW132 Type 1 1/2 Spade Handle Electric Drill View Diagrams & Manuals
DW610 Type 1 1-1/2 HP Router View Diagrams & Manuals
DW612 Type 1 Router View Diagrams & Manuals
DW610-35 (Type 1) 1-1/2 Hp Router View Diagrams & Manuals
DW610-44 (Type 1) 1-1/2 Hp Router View Diagrams & Manuals

Black and Decker

1557 Type 2 1/2 Magnetic Drill Press View Diagrams & Manuals
1321 Type 6 1/2 HD Drill 120 Volt View Diagrams & Manuals
1322 Type 6 1/2 HD Reversible Drill View Diagrams & Manuals
267 Type 4 1/2 HD Reversible Drill View Diagrams & Manuals
5140 Type 1 M/S 1/2 Spade Handle Drill View Diagrams & Manuals
5140 Type 2 M/S 1/2 Spade Handle Drill View Diagrams & Manuals
3315 Type 2 120 Volt Motor Router View Diagrams & Manuals
3315 Type 3 120 Volt Motor Router View Diagrams & Manuals
6124 Type 2 HD Polisher 2300 RPM View Diagrams & Manuals
6112 Type 2 HD Sander 4800 RPM View Diagrams & Manuals
4046 Type 3 Sander 120 Volt View Diagrams & Manuals
4015 Type 4 Orbital Sander 115 Volt View Diagrams & Manuals
7616 Type 1 1 HP Router View Diagrams & Manuals
2721 Type 1 Router View Diagrams & Manuals
2720 Type 1 Router View Diagrams & Manuals
1321 Type 5 1/2" Extra Heavy Duty Reversing Drill View Diagrams & Manuals
1322 Type 5 1/2" Extra Heavy Duty Reversing Drill View Diagrams & Manuals
4046-BDK (Type 3) Sander 120v W/Trgr View Diagrams & Manuals
1320-98 (Type 5) Gearmotor View Diagrams & Manuals
DW4002BR (Type 1) Brush View Diagrams & Manuals
B6112 (Type 2) 7 /9 Sander View Diagrams & Manuals
B6124 (Type 2) 7in/9in Polisher View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Drill Parts
  • Drill Press Parts
  • Electric Drill Parts
  • Router Parts
  • Engine Parts
  • Polisher Parts
  • Sander Parts

Customer Part Reviews ?

4.4
Average Rating (out of 5):
7 Reviews
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • They fit my type 2 !
    I didn’t think they would fit but they did.
    Guest - June 15, 2021 Verified Purchase
    Carbon Brush
    Good to find a supplier, no problem getting it to New Zealand
    iGlobal - September 13, 2020 Verified Purchase
    You did a very good job. I have my oun work shop
    I got the brush in my roter and it is working grate
    Guest - July 26, 2020 Verified Purchase
    Perfect fit
    Fast shipping, original part, easy installation, perfect fit 👍🏼
    Guest - April 22, 2020 Verified Purchase
    Old Router back in service
    Bearing and brushes returned my old Black & Decker Router to service. Will keep repairing old tools!!
    Bob - October 19, 2019 Verified Purchase
    Received as promised
    Parts were bought as back up have not been used double-checked fit the router they were bought foresee no reason they should not work fine
    Guest - August 6, 2019 Verified Purchase
    Sell brushes in sets
    You should sell brush sets in pairs. Most all electric motors take 2 brushes. One brush did me no good. Frustrated and junked motor.
    Guest - November 8, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (3 rated repairs)?

    Worn out brushes

    Scott - April 1, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Unscrew the brush caps, remove the old brushes, then carefully insert the new brushes. Don't kink or damage the wire.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes were worn

    Raynald - May 9, 2019
    Tool Type

    Electric Drill

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Power Drill, Commercial drill mixer

    Remove the brush cap. Remove the brush.then replace with new brushes put the brush cap back on all done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Dewalt router brushes arcing

    ALBERT - July 27, 2018
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the brush caps
    Removed the worn brushes
    Installed the new brushes
    Installed the brush caps
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal