eReplacementParts.com
877-346-4815
Ryobi Parts
Repair Parts Home
  
Power Tool Parts
  
Ryobi Parts
  039028007035 Carbon Brush

Carbon Brush 039028007035

OEM part for: Ryobi, Ryobi -TTI

Part Number: 039028007035


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 4 hours and your part ships today!
Easy Less than 15 minutes (26 rated repairs)?
OEM: Original Equipment Manufacturer ?
RyobiRyobi -TTI
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine Ryobi replacement part, and is sold individually.
Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking

Carbon motor brushes are one of the most commonly replaced power tool components.
Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.
Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.
A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.

When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Also Known As: Motor Brush
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 7 machines

Ryobi

AG452K Angle Grinder View Diagrams & Manuals
AG453 Angle Grinder View Diagrams & Manuals
NT1G Angle Grinder View Diagrams & Manuals
AG454 18 Volt Angle Grinder View Diagrams & Manuals
AG4531G Angle Grinder View Diagrams & Manuals
AG452 Angle Grinder View Diagrams & Manuals

Ryobi -TTI

AG452 Angle Grinder View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Grinder Parts

This part replaces obsolete part #: 039028001036

Customer Part Reviews ?

4.4
Average Rating (out of 5):
14 Reviews
Click to filter by ratings:
5 stars
12
4 stars
0
3 stars
0
2 stars
0
1 stars
2
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Revitalized an old favorite tool, like new again!
    Just the thing.
    Guest - November 11, 2023 Verified Purchase
    Great Service
    My part came quickly and worked immediately. I will definitely be a repeat customer.
    Guest - March 13, 2022 Verified Purchase
    Great part
    Great part worked great fast delivery
    Guest - February 8, 2022 Verified Purchase
    Easy repair
    Early and quick delivery, good condition and great price.
    Guest - May 21, 2021 Verified Purchase
    Perfect for my Ryobi AG452
    Perfect replacement, and a 5 minute repair..................
    Guest - May 3, 2021 Verified Purchase
    perfect!
    it fit
    Guest - April 14, 2020 Verified Purchase
    EASY REPAIR WORK GREAT.
    WORK GREAT CAME VERY QUICK.
    Guest - March 3, 2020 Verified Purchase
    Easy Repairs
    The was in great condition
    Guest - February 24, 2020 Verified Purchase
    Fast repair
    The part arrived fast and good quality part.thank you
    Guest - September 5, 2019 Verified Purchase
    I
    Aok
    Guest - June 13, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (26 rated repairs)?

    Grinder began to stop intermittently and then failed completely. Inspection of brushes revealed one worn and one badly damaged motor brush.

    Mickey - December 4, 2015
    👍 6 of 7 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers

    Using a flat blade screwdriver, remove motor brush retaining cap. Remove existing brush. I was able to grasp one brush with my fingers and remove. The other required a pair of needle-nosed pliers to grasp and remove it. Insert new brush. Replace retaining cap. Repeat for other brush.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Angle grinder: brushes worn out and switch over-heated / burned out.

    Anthony - May 15, 2017
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, emery cloth, chip brush, soldering iron.

    I bought this particular grinder because it has easily replaced brushes and it was easy. Removed the two screw on brush caps and the brush assembly (brush and spring) pulls right out. While you can just insert the new brush I chose to completely disassemble the motor to "turn" the armature end where the brushes ride and grease and lube everything. (FYI I bought two sets of brushes in case they go out of stock when I need to replace them again)

    Replacing the switch is straightforward but disassembly of the handle is fiddley. Once all the screws are out you still have to gently pry the sides apart. Note how the wires are run as there's not much room and they have to go back the same way. And mine has a rotating handle so it has to fit into a channel properly too.
    In a pinch, if you have the skills and a dremel, you can take the switch apart and swap the parts over to the other side and make it work. The switch is designed like two matching halves and only one side is used.
    All in all it took about 30-60 minutes and it works like new. I hate to just toss out tools or things that still have lots of life left in them.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brush and Spring are easy remove cap and replace. Switch was for a friend.

    Arturo - January 2, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    On My RYOBI 4 1/2" Angle Grinder with Rotating Rear Handle (Model: #AG453) , I replace the brush & spring , which was real easy. 1. Disconnect the power 2. remove the plastic caps on side of the grinder with a flat screwdriver and finally remove brush & spring and just simply replace with the new set and replace plastic cap. BOOM!!! you are done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Needed new brushes

    Mike - December 16, 2015
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Use a screwdriver to remove the brush caps, Remove old brushes, then replace with the new ones. Replace the brush caps. Done.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    replaced carbon brush

    Perry - May 16, 2021
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed and replaced brush
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Had to hit it, or rotate the disc by hand to get it running, until it completely quit. It was shooting sparks out the vent holes before it finally quit.

    Kenny - May 5, 2021
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed 2 brush caps and old brushes, installed new brushes and caps. One of the new caps broke during reassembly. The new replacement cap outside diameter was too big, but was able to reduce the size by using a belt sander, and it was a perfect fit after that....
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    brush to short

    julian - July 7, 2020
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    replaced brush.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes burned up

    Curtistyne - February 11, 2020
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers

    Removed old brush set and installed new one in its place.easy job.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Old bearing seased up and the rubber case that the bearing is mounted in toast, this part not available

    Steven - July 18, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, bearing seater

    Install new parts where needed
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sparks from motor

    Paul - June 7, 2019
    Tool Type

    Grinder

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Replaced brushes
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal