eReplacementParts.com
877-346-4815
DeWALT Parts
Repair Parts Home
  
Power Tool Parts
  
DeWALT Parts
  398139-01 Carbon Brush With Lead

Carbon Brush With Lead 398139-01

OEM part for: DeWALT

Part Number: 398139-01


Install
Videos!
Grid squares measure 1x1 inch
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Medium 15-30 minutes (8 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALT
Does this d-block d-md-none fit my product?

Product Description ?

Genuine DeWalt replacement part
rnIncludes 1 Carbon Brush with wire lead in rubber sheath attached.rn

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components.  Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement.  Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power.  A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned.  When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 24 machines

DeWALT

DW616 Type 1 Fixed Base Router View Diagrams & Manuals
DW616M Type 1 Fixed Base Router View Diagrams & Manuals
DW616D Type 1 D-Handle Router View Diagrams & Manuals
DW616P Type 1 Router View Diagrams & Manuals
DW616S Type 1 Router View Diagrams & Manuals
DW618 Type 1 Fixed Base Router View Diagrams & Manuals
DW618M Type 1 Fixed Base Router View Diagrams & Manuals
DW618D Type 1 D-Handle Router View Diagrams & Manuals
DW618P Type 1 Router View Diagrams & Manuals
DW618B3 Type 1 Three Base Router Kit View Diagrams & Manuals
DW618B3E Type 1 Base Router Kit View Diagrams & Manuals
DW618PKB (Type 1) Combo Kit Router Fxd View Diagrams & Manuals
DW618K (Type 1) 2-1/4hp Router View Diagrams & Manuals
DW618K (Type 2) 2-1/4hp Router View Diagrams & Manuals
DW618PK (Type 1) 2-1/4hp Router View Diagrams & Manuals
DW618PK (Type 2) 2-1/4hp Router View Diagrams & Manuals
DW616K (Type 1) 1 3/4 Hp Fixed Base Route View Diagrams & Manuals
DW616PK (Type 1) Router View Diagrams & Manuals
DW616SK (Type 1) Router View Diagrams & Manuals
DW618 (Type 2) 2-1/4hp Router Power Tool View Diagrams & Manuals
DW618B3 (Type 2) 3 Base Router Kit Power Tool View Diagrams & Manuals
DW618D (Type 2) 2-1/4hp Router Power Tool View Diagrams & Manuals
DW618M (Type 2) 2-1/4hp Router Power Tool View Diagrams & Manuals
DW618PKB (Type 2) Combo Kit Router Fxd Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Router Parts

This part replaces obsolete part #: 398139-00

Repair Videos ?

Watch the Repair Video for Carbon Brush With Lead
Articles:
Step-by-step instructions for removing and installing the motor brushes on your DeWALT router....
December 11, 2017

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy repair
    Parts arrived as expected, installed parts on Dewalt router and worked it like new.
    Jeff - September 2, 2019 Verified Purchase
    Great
    Very pleased with purchase
    Jeff - August 10, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Carbon Brush With Lead


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 15-30 minutes (8 rated repairs)?

    Arcing on commutator after use at high speed for several hours

    bob - May 26, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Power Drill, bearing puller

    Remove plastic housing for electric motor
    Remove broken (in pieces) magnetic ring
    Inspect commutator
    Remove top shaft bearing with bearing/wheel puller
    Remove chipped brushes
    Sand commutator with silicon carbide sand paper (insert narrow strip of sc sand paper around commutator hold tight against commutator and manually revolve commutator to polish commutator sections)
    Replace with new brushes
    Replace magnetic ring
    Re seat top bearing using drill press as press
    Replace plastic housing for motor

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Router stopped running

    Brandt - May 20, 2020
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Replaced the brushes... Runs great now!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    brushes worn out

    Gary - February 26, 2020
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    removed cover, replaced worn brushes with new, replaced cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Worn cord and arcing from brushes

    Nigel - September 6, 2019
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Power Drill, Thin finish nail

    Watched you tube video.
    Removed router cover
    Removed and replaced brushes
    Replaced cover
    Plugged in New cord
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    It wasn't the brushes.

    Dale - March 20, 2019
    Tool Type

    Router

    Difficulty

    Medium

    Time

    More than 2 hours

    Tools Used

    Screwdriver

    1. Removed and replaced brushes, which took over a week due to shipping.
    2. Router started right up and worked for approximately 30 seconds.
    3. Got fed up and purchased new router.
    4. Tried power cord from new router. Issue solved.
    5. Ordered new cord for old router.
    6. Still waiting for new cord to ship.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Main bearing seized and motor brushes were in poor shape

    Andrew - March 1, 2019
    Tool Type

    Router

    Difficulty

    Hard

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Adjustable Wrench, Mallet, star drive bit set

    For brushes, remove top housing, pulled back on spring clip, removed old brush and inserted new one.

    The bearing was much tougher.
    Unscrewed plate holding the shaft lock pin (watch that spring behind the button, it can get away from you!).
    Unscrewed the large nut on the shaft over the bearing.
    Getting the bearing out is the tough bit and I am not sure I have the best method, but I "tapped" on the collet end of the shaft until the bearing was clear of the shaft. It was frozen completely.
    I put the new bearing on the shaft and "tapped" it down until there was virtually no up and down on the shaft. Test that the shaft turns freely and that the brushes are aligned on the commutator.
    I then put the large nut back on and assembled the shaft lock pin and spring and screwed that plate back on the end of the router. Check that the lock pin will engage and disengage. If it does not, the bearing may not be completely seated.
    Reattach the the rear housing over the electricals and test that the router works.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Uneven start, excessive sparking

    David - August 23, 2017
    Tool Type

    Router

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Pliers

    1. Unscrew 4 screws on top of router,
    2. Remove old brush (there are two, pliers optional but helpful),
    3. Insert new brush (pliers helpful in holding back spring which pushes it into place until the new one is in),
    4. Reattach top.

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Magnet broke which broke brush

    Phillip - August 20, 2016
    👍 1 of 2 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Bearing puller

    Removed bearing replaced magnet and brush. Replaced parts with the new ones and reassembled.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal