Medium
15-30 minutes
This is an OEM Poulan Carburetor Intake Boot used on gas trimmers to connect carburetor to a carburetor-adapter. This part is made out of Rubber. Over time rubber material can dry out and crack. If this part is warped, cracked or damaged it needs to be replaced for the unit to operate properly.
Carburetor Boot Adapter 545190501
OEM part for: Poulan
Part Number: 545190501
$4.99
In Stock
Order within the next 29 minutes and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 11 machines
Poulan
PP338PT Gas Trimmer View Diagrams & Manuals
PP335 (2010) Gas Trimmer View Diagrams & Manuals
PP133 Pro Gas Trimmer View Diagrams & Manuals
PP333 Trimmer View Diagrams & Manuals
PP330 Gas Trimmer View Diagrams & Manuals
PPB330 Grass Line Trimmer, Gas View Diagrams & Manuals
PPB330 (1) Grass Line Trimmer, Gas View Diagrams & Manuals
PPB330 (2) Grass Line Trimmer, Gas View Diagrams & Manuals
PPB330 (3) Grass Line Trimmer, Gas View Diagrams & Manuals
PPB335 (Type 1) Gas Trimmer View Diagrams & Manuals
PP335 Gas Trimmer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Trimmer Parts
- Grass Trimmer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
9
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Fit perfectly!
This replacement boot fit my Poulan pole saw like a glove. Thank you.
Guest -
August 21, 2023
Verified Purchase
worked as good as the old one.
gas weed eater working great again and part fit just like the old one.
Charles -
July 26, 2023
Verified Purchase
Worked as designed
Fit perfectly
Guest -
July 10, 2023
Verified Purchase
exact replacement.
arrived on time, fit perfectly, exactly as advertised
Guest -
November 21, 2019
Verified Purchase
Great!
The exact part we needed. Fast service.
Guest -
August 22, 2019
Verified Purchase
part is right on and works good!
it works good! thks!
Guest -
July 26, 2019
Verified Purchase
Great part, a direct replacement for my pole saw
Shipped quick and returned my pole saw back to service. Made me happy but not sure if my pole saw feels the same. It's week long vacation is over.
Guest -
June 18, 2019
Verified Purchase
Worked great
Arrived in good time
Guest -
June 1, 2019
Verified Purchase
works great
it was for my weed eater, Thank you
Guest -
May 14, 2019
Verified Purchase
Great part
This part was is great condition. Exactly what I needed to finish getting my weedeater working correctly. Arrived early and thanks again.
Guest -
July 23, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Boot Adapter
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Poulan grass trimmer high speed air intake rubber boot cracked from heat and let too much air in at cold start.
Andrew - April 18, 2017
👍 8 of 8 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Nutdriver
Parts Used
Removed the trimmer carb cover. Removed the air filter plate. Removed the failed air intake boot. Installed the new boot and reassembled. Trimmer runs well now! Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carb boot torn
Len - November 24, 2015
👍 5 of 6 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Took air breather off, took off old boot and replaced with a new one, put air breather back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not stay running die out
Bill - November 16, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
1. Removed housing on trimmer motor
2. Loosened carb and replaced hose
2. Loosened carb and replaced hose
Did you find this story helpful?
Thanks for voting and helping fellow customers!
It wa sucking air
Curtis - August 12, 2020
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Took the carburator loose and removed the old boot adapter off and put the new one in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Unit was left in the barn for a few years and would not start.
Donald - July 30, 2020
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Removed air cleaner and removed the old fuel lines and removed the 2 carburetor hold down nuts and removed the carburetor and un hooked the throttle cable from the carburator and pulled the carburator boot from the motor and then reversed the removal process to put it all back together and then installed new fuel lines and filter in the unit, pumped up the fuel system after filling fuel tank with fresh fuel/oil mix.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carb rubber boot had cracks in it.
Richard - June 19, 2020
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Purchased a new boot from ereplacementparts and then installed it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not start on spark ,carb was not getting fuel
Tod - November 28, 2019
Tool Type
Pruner
Difficulty
Expert
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Torque wrench,ignition gauge,star hex bits,sparkplug gap tl
Replaces the ignition coil, new carborator ,fuel lines,fuel filter,spark plug and also air filter. A little fine ajusting on the carborator. Tuning very well with a lot of more power to cut and trim trees.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
would not run at full speed
Roger - March 24, 2019
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, Nutdriver
Disassembled cowl to access engine
removed carb
found boot adapter to be cracked and leaking
order new parts
replaced boot and filter then reassembled all .
removed carb
found boot adapter to be cracked and leaking
order new parts
replaced boot and filter then reassembled all .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor boot had a crack
Ronald - June 25, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Removed air filter and cover, removed old boot with a screwdriver and slide the new boot on with my fingers
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Split in caburetor boot
Alfred - April 11, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Took cover off
Unbolted carb
Took boot off
Put new boot on
Bolted carb back on
Put cover back on
Unbolted carb
Took boot off
Put new boot on
Bolted carb back on
Put cover back on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
