Single Blade 95103E701MA

Specifications

Length: 20-9/32"
Center Hole Size: 0.848
Plane: Formed
Width: 2.5
Thickness: 0.187
Cut Direction: RH
Center Hole Shape: Circle

Description:

Genuine Murray replacement part, this item is sold individually.
This blade is used on all the Lawn Tractors listed below.
Some manufacture send out their blades not completely sharpened (For Liability Proposes).
We have an article and video on how to do this in our Repair Center. Or you can have a local lawn shop do this for you.
Make sure you put the new Blade on the same way the old on was on.

Frequently Purchased With

Belt-85.94 Wed..
$36.73

Belt-v-motion ..
$31.41

Nut.56-18 Reg ..
$3.99

Compatibility

This part is compatible with the following machines:

Murray

Expand the 122 compatible machines

Products Compatibility

This item works with the following types of products:

• Lawn Tractor

Repair Instructions: Submitted by Customers Like You

5 of 5 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Single Blade - 95103E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

My blades were in need of replacement.

Use a socket to remove the blade nut and the washers. Note which washer goes where. Remove the old blade, don't lose the blade adapter. Place the blade adapter on the shaft then the blade. Place the washers on in the correct order and tighten the blade nut. Your blades FIT EXCELLENTLY.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Bearing Wheel 3/4 Se - 91334MA

Single Blade - 95103E701MA

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Wrench Set, Rubber Mallet & Hammer

Bent Blade & worn front wheel bushings

Blades were fairly new, That's why I only replaced 1. Front bushings were wore on the outer side, from tight turns. Used inner for outers, and replaced both front inner bushings. Last bushing installed were from a local vendor, who's no longer in business. They were heavy duty. Also replaced front cotter pins. wheels pushed washer into old pins and cut into them

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Single Blade - 95103E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Wrench Set

Bent & Dull

Removed old blade and put on new blade

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Single Blade - 95103E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Chain to hold blade, while loosening nuts and tightening.

NEEDED NEW BLADES, My other half, she likes running over rocks :)

I used my engine lift, I placed a chain around each of the front axles, raised lawn tractor vertically on it's rear wheels, removed old blades, installed new blades, makes for a easy job. The only way to work on a lawn tractor lower end. The hardest part was moving my engine lift out of the garage.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Single Blade - 95103E701MA

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Blade was bent

Removed the bent blades and replaced them

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Pushnut, 3/8 - 703948

Pulley Idler - 91801MA

Rod -deflector - 94957ZMA

Deflector Assembly - Chut - 94707MA

Single Blade - 95103E701MA

Spring-torsion - 166X4MA

Repair Difficulty:

Easy

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Adjustable Wrench

Old Blade & Pulley

Regular maintenance, oil change, New blade, New Pulley, New spark plug, New Air filter, repair muffler.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Nut.56-18 Reg Unf Z-y - 15X100MA

Shaft Splined - 94129MA

Single Blade - 95103E701MA

Jackshaft Hsng - 492574MA

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set, Breaker Bar for all Nuts / Screws

Jack-shilf bearings & shaft wore out, the blades were bad, all new parts purchased fit great.

I used my 2 ton engine lift to raise the lawn tractor mower front end high enough to do the repair job easily. 3 of 5 screws attaching jack-shaft to housing broke. Could not remove the spacer from old main shaft to replace with new shaft. Hardware store for new screws, I had metal tubing on hand to make a new spacer. This old machine is working again.

Thanks, for having all the parts I needed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Single Blade - 95103E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set, Jack

New blades - after 15 years of use

Just as I had lifted the mower up with a jack, my neighbor showed up and insisted that I let him do the repair. He is a professional mechanic and finished the installation in less than 15 minutes; as I watched. He used a box-end wrench on the top and a ratchet socket wrench on the bottom. I handed him the blades.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Single Blade - 95103E701MA

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set

Hit a root. Bent blade, broke blade adapter

1. Lift deck to highest level
2. Apply parking brake
3. Install blade adapter in correct orientation
4. Install blade washer/blade/nut. Being careful to correctly seat blade, torque to manufacturers recommendations.
5. Lower deck to lowest position

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 2 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used:

Single Blade - 95103E701MA

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Needed new blades

Removed the blade nuts and washers, then the blades
Installed the blades on the spindles and replace the washers and tightened the blade nuts

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

5 Reviews

Click to filter by ratings:

5 stars

4

4 stars

1

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Perfect fit

It came quick and it fits perfectly

Guest - June 14, 2023 Verified Purchase

Lawnmower Parts.

The parts are exact fit and top quality. Delivery was on time. Great place to buy your parts.

Guest - July 22, 2020 Verified Purchase

Parts always worked as expected.

I've always receive my orders quickly, and I'm very happy dealing with this company.

Guest - July 4, 2020 Verified Purchase

Worked as expected

Thank you for your fast delivery and correct part I will recommend you guys!

Guest - June 8, 2020 Verified Purchase

Exact match perfect fit

The part arrived in great condiction, making for a quick and easy instillation. At the time of order, this part was out of stock, prolonging shipping time. Ordering over a holiday weekend can cause delays in shipping too. This part sees the most wear and tear. It is critical to the operation of the machine. Having a larger stock in this part during the high demend season would be most benfitcal to the custsoms.

Guest - July 17, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Single Blade