Flat Cloth Belt Set H-AH20065
Part Number: H-AH20065
Order within the next 8 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: AH20065.
Product Information
Description:
| These are a genuine replacement belts designed for Hoover upright vacuums. These are main belts that driver the brushroller. It is recommended to replace these belts every 6 months to ensure optimum performance. This pack includes two (2) rubber belts. To replace this item you would need a screwdriver. • Access the vacuum belt and brushroll area • Remove the brush roller and the old belt • Install the new vacuum belt on the motor shaft and brush roller • Install the brush roller with the belt correctly positioned on it • Reassemble the vacuum |
Frequently Purchased With
Compatibility
the 30 compatible machines
This part is compatible with the following machines:
Hoover
UH30300 WindTunnel Bagged Upright
UH30310 WindTunnel Pet Bagged Upright
UH70200 WindTunnel Series
UH70205 WindTunnel Series
UH70210 WindTunnel Series
UH70211 WindTunnel Series
UH70212 WindTunnel Series
UH70215 WindTunnel Series
UH70130 WindTunnel Series Rewind
UH70600 Windtunnel Max Multi-Cyclonic Bagless Upright Vacuum
UH70202 WindTunnel Upright Vacuum
UH70601 WindTunnel Max Upright Vacuum
UH70603 WindTunnel Max Upright Vacuum
UH70605 WindTunnel Max Upright Vacuum
UH70604 Remedy Multi-Cyclonic Bagless Upright Vacuum
UH30310 WindTunnel Pet Bagged Upright
UH70200 WindTunnel Series
UH70205 WindTunnel Series
UH70210 WindTunnel Series
UH70211 WindTunnel Series
UH70212 WindTunnel Series
UH70215 WindTunnel Series
UH70130 WindTunnel Series Rewind
UH70600 Windtunnel Max Multi-Cyclonic Bagless Upright Vacuum
UH70202 WindTunnel Upright Vacuum
UH70601 WindTunnel Max Upright Vacuum
UH70603 WindTunnel Max Upright Vacuum
UH70605 WindTunnel Max Upright Vacuum
UH70604 Remedy Multi-Cyclonic Bagless Upright Vacuum
UH71209 Whole House Cleaner
UH70140 WindTunnel Rewind Plus Bagless Upright
UH72600 WindTunnel
UH70930 WindTunnel 3 Pro Pet Bagless Upright
UH30302 WindTunnel T Series
UH30308 WindTunnel T Series
UH70240 WindTunnel Rewind Plus
UH70607 WindTunnel Air, T Series
UH70608 WindTunnel Max Pet Plus
UH70700 WindTunnel Max Pet Plus
UH71214 Elite Rewind Whole House Bagless
UH71215 Windtunnel 2 Rewind Pet
UH71230 Whole House Elite
UH71250 Elite Rewind Upright
UH71251 Windtunnel 2 Whole House Rewind
UH70140 WindTunnel Rewind Plus Bagless Upright
UH72600 WindTunnel
UH70930 WindTunnel 3 Pro Pet Bagless Upright
UH30302 WindTunnel T Series
UH30308 WindTunnel T Series
UH70240 WindTunnel Rewind Plus
UH70607 WindTunnel Air, T Series
UH70608 WindTunnel Max Pet Plus
UH70700 WindTunnel Max Pet Plus
UH71214 Elite Rewind Whole House Bagless
UH71215 Windtunnel 2 Rewind Pet
UH71230 Whole House Elite
UH71250 Elite Rewind Upright
UH71251 Windtunnel 2 Whole House Rewind
Products Compatibility
This item works with the following types of products:
- • Vacuum
Questions & Answers for Flat Cloth Belt Set
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Broken belt
Opened the vacuum and replaced the belt. Closed vacuum and it was fixed!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The roller belt broke.
First I removed the underside panel of the vacuum to access the broken belt. Second I removed the roller and the broken belt, then I cleaned the roller, placed the new belt onto the roller and put the roller back. Finally I reinstalled the underside panel. All done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wire strippers
Burned motor
Disassemble handle from the base. Remove motor from casing and replace. Assemble vacuum and check operation.
Special note: This is not an easy repair. You must have knowledge of electrical circuits. Always follow indicated safety instructions.
Special note: This is not an easy repair. You must have knowledge of electrical circuits. Always follow indicated safety instructions.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Vacuum cleaner belt broke
Removed plastic frame, replaced belt, reattached plastic frame
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Belt was slipping
Took bottom panel off pulled roller out. Removed old belt. Replaced with new one I got from ereplacementparts.Com. Best place to get parts for a wide variety of things. I always tell people of my parts I've got over the years. Thank you
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Vacuum needed another belt
Opened the part of the vacuum where the belt was and replaced it, then reversed what I did
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Vacuum belt broke
I removed the belt housing and replaced belt. Belt was very hard to find. Vacuum is new however the belt should be available. I ordered 4 belts hoping to never buy any for a while.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Just ran out of belts. wanted more on hand for when Ineed one.
Take marked screws ot for bet replacement, remove old and put in new. No brainer even for the mechaniciy challenged. Don't over tighten screws as their going in plastic.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
New parts.
Reassembled vac housings for brush and belts. Parts sent fit perfectly for the make and model parts weren't available locally and the vendor kept us updated on delivery and for part of the order a back order status. Thank you!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair. Worked as expected.
Arrived quickly. Fit perfectly. Vacuum cleaner is working great agIn.
Guest -
May 20, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
