Right Side Geared Belt B-203-6804

Specifications

3" Diameter

Description:

Genuine Bissell supplied replacement part for a variety of Carpet Cleaners. This item is sold individually. When replacing Right Belt it is recommended to replace the Left Belt as well for best operation. The belts should be checked periodically. If belts are worn or stretched they need to be replaced to provide best performance.

Frequently Purchased With

Geared Brush B..
$9.48

Compatibility

This part is compatible with the following machines:

Bissell

8930M Proheat 2x PowerSteamer
9300-2 ProHeat 2x
94004 Proheat 2x Deep Cleaner
9400-3 ProHeat 2X Power Steamer
9400-4 ProHeat 2X Powerstreamer Carpet Cleaner
17N4 Deep Clean Pet
30K7 Deep Clean Lift-Off
36Z9 Deep Clean Deluxe Pet
66E1 Deep Clean Lift-Off
80X9 Deep Clean Lift-Off
94Y22 Lift-Off Deep Cleaner
27F6 Lift-Off Deep Cleaner
35K3 Lift-Off Deep Cleaner
73H5 Lift-Off Deep Cleaner
8960 ProHeat 2X Upright Deep Cleaner
9300 ProHeat 2X Upright Deep Cleaner

Expand the 33 compatible machines

Products Compatibility

This item works with the following types of products:

• Deep Fryer
• Vacuum

Repair Instructions: Submitted by Customers Like You

Tool Type:

Vacuum

Parts Used:

Swivel Arms-rt & Lt - B-203-6802

Right Side Geared Belt - B-203-6804

Geared Brush Belt (left Side) - B-203-6688

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Belts and swing arms worn out on my carpet cleaner

Removed old parts and replaced. Diagram on you site was like a road map, very easy to see how to make the repair. Machine is working like new. You guys service is the best, parts arrived in three days including the day I ordered. Keep up the good work.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Vacuum

Parts Used:

Right Side Geared Belt - B-203-6804

Geared Brush Belt (left Side) - B-203-6688

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, None

Belts broke on steam cleaner.

Take off suction cover to gain access to side belt panels. Remove broken belt and reverse to put back together.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Vacuum

Parts Used:

Right Side Geared Belt - B-203-6804

Geared Brush Belt (left Side) - B-203-6688

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Dog's hair wrapped around brush and jambed it. The drive belt broke!

Dismantled bottom front of carpet cleaner and took out brushes and drive belts.
Cut and removed dog hair from around brushes to free up rotation.
Replaced both drive belts with new parts.
Reassembled carpet cleaner and tested.
Works as good as new!

Only tool needed was phillips screwdriver.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Vacuum

Parts Used:

Right Side Geared Belt - B-203-6804

Geared Brush Belt (left Side) - B-203-6688

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Drive belt for brushes broken, replaced both.

1. Removed the end plates from the brush assembly.
2. Removed the cover plate of the assembly.
3. Removed the brushes.
4. Replaced the belts.
5. Reinstalled.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Vacuum

Parts Used:

Pump Belt - B-010-0620

Brushroll Belt - B-010-0621

Pivot Arm Retainer Assembly - B-555-9113

End Cap W/edge Brushes-rt & Lt - B-203-6685

Right Side Geared Belt - B-203-6804

Geared Brush Belt (left Side) - B-203-6688

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver

Brush roller would not spin. Pump belt broken. End caps broken. Just a mess!

Removed all broken or missing parts above and used instructions that came with belts. Easy to follow, no problem. Relined and locked side end caps with side brushes and put together with locking screw. no problem. you guys did not have the front nozzle for the 8920 so I got some automotive glue and screw clamps to hold till glue set up over night. Reinstalled all of the above. all is well. Cost me $33.00 for parts from e-replacement and five dollars for the glue. Only took 3 days from the time of ordering till finish. thanks guys, Neely

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 2 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Right Side Geared Belt - B-203-6804

Geared Brush Belt (left Side) - B-203-6688

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Power Drill, None

Rollers did not work on my bissell rug cleaner less than a year old !

I looked up the operators manual online and went step by step to repair both rollers loved the time and money I saved repairing myself.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Vacuum

Parts Used:

Front Nozzle - B-203-6678

Right Side Geared Belt - B-203-6804

Geared Brush Belt (left Side) - B-203-6688

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

I broke the front nozzle off my Bissell carpet shampooer

I just removed the broken part with a phillips screwdriver & replaced it with the new one. I was unable to get my replacement parts from Bissell. They were unavailable for a shampooer I had only had 2 years. If not for eReplacement Parts, I would have been very unhappy.
Thank you for your assistance & prompt delivery of the parts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Right Side Geared Belt - B-203-6804

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Belt broke

1. Took off bottom of floor cleaner
2. Put on new belt
3. Put it back together

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Detent Lever - B-203-6724

Right Side Geared Belt - B-203-6804

Geared Brush Belt (left Side) - B-203-6688

End Cap Assembly W/ Cleanshot - B-203-6967

Nozzle W/end Cap And Cleanshot - B-203-7650

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers

Bissell heated carpet cleaner was dropped down a flight of stairs

Replace side covers
Replace front suction assembly
Replace belts (they were 6 years old and well used)
Replace detent lever (the most time consuming)

I'm old school...take it apart and remember the order and where you took it off of. lower end was easy, 5 screws only and only one way to reinstall.

Detent lever required disassembly of upper half of handle followed by disassembly of the lower half. after that it was easy, just two screws. then reverse the order you got there and its done...

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

3 Reviews

Click to filter by ratings:

5 stars

2

4 stars

0

3 stars

1

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Bissell right side geared belt

Great customer service, very kind, hooked me up with the belt needed for my Bissell carpet cleaner . Fast shipping. Will purchase again.

Guest - March 4, 2022 Verified Purchase

Sweeper part

Quick delivery. Part was exact as ordered

Guest - December 11, 2019 Verified Purchase

Gear belt for Bissell carpet shampooer

The part was delivered very timely, only the part did not fit the machine. It was too small.

Guest - May 29, 2020 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Right Side Geared Belt