Belt 429962-08
Part Number: 429962-08
Order within the next 12 hours
and your part ships today!
and your part ships today!
Product Information
Description:
| This is a genuine DeWalt replacement part. Package includes one belt designed for easy installation. • Belt Width – 7/8" • Belt Length – 14" rn rnClean the pulleys off before putting the new belt on to ensure top performance and longevity with your new belt. Inspect belts periodically and replace when worn to maintain peak performance. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Planer
Repair Guides
![]()
Watch the Repair Video for
Belt
Articles:
|
Step-by-step instructions for removing and installing the drive belt on your DeWALT planer....
January 29, 2018
|
Questions & Answers for Belt
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
8 of 8 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belt worn
1- Removed the top of the planer
2- Removed the elevation screw on the side of the belt
3- Put the belt into some boiling water for a minute to softening it a little bit(no more than one minute)
4 Put 3 threads in on the smaller pulley, and started with one on the big pulley on the second belt you'll need to use the screw driver (make sure it doesn't have any sharp edges)
5 Started turning the pulley by very little increments until all the belt was in both pulleys
6 Put the elevation screw and top of the planner back on
this belt fits perfectly
2- Removed the elevation screw on the side of the belt
3- Put the belt into some boiling water for a minute to softening it a little bit(no more than one minute)
4 Put 3 threads in on the smaller pulley, and started with one on the big pulley on the second belt you'll need to use the screw driver (make sure it doesn't have any sharp edges)
5 Started turning the pulley by very little increments until all the belt was in both pulleys
6 Put the elevation screw and top of the planner back on
this belt fits perfectly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 7 people found this instruction helpful
Tool Type:
Planer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
The drive belt got burned due to trying to shave too much wood. After hearing up too much it snapped before I could shut the motor down.
1. Removed the blade cover.
2. Removed the motor housing.
3. Removed old belt.
4. Started new belt on the larger driver pulley.
5. Stretched the belt with a large screwdriver and started it on the smaller drive pulley.
6. Rotated pulleys to feed belt onto the smaller drive pulley.
7. Once the belt was "started" on both pulleys, used the screwdriver to help get the belt positioned completely on the pulleys.
8. No.7 required several times to get everything aligned correctly.
9. Replaced blade cover and tightened 2 bolts.
10. Replaced motor housing and tightened 4 bolts.
11. Replaced thickness crank and secured with new screw.
2. Removed the motor housing.
3. Removed old belt.
4. Started new belt on the larger driver pulley.
5. Stretched the belt with a large screwdriver and started it on the smaller drive pulley.
6. Rotated pulleys to feed belt onto the smaller drive pulley.
7. Once the belt was "started" on both pulleys, used the screwdriver to help get the belt positioned completely on the pulleys.
8. No.7 required several times to get everything aligned correctly.
9. Replaced blade cover and tightened 2 bolts.
10. Replaced motor housing and tightened 4 bolts.
11. Replaced thickness crank and secured with new screw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Planer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Broken belt and switch
Use Philips screwdriver to remove and replace switch. Be careful to mark wiring so you can put them back on the right place.
To replace the belt, remove the side cover removed and then work the belt over the pulleys.
A little difficult but it did stretch enough.
To replace the belt, remove the side cover removed and then work the belt over the pulleys.
A little difficult but it did stretch enough.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Broken drive belt
Remove the over that the belt is covered by. Remove the old belt and clean inside. Take the new belt and start it lust barely on reach pulley (It will be tight) then rotate the belt while pushing it all the way on to the pulleys. Then replace the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Requires boiling water to stretch the belt. Metric Allen wre
Drive belt failed on desalt planer
1. Removed top of planer
2. Removed damaged belt.
3. Belt would not go on pulleys. Heated in boiling water for various lengths of time. Finally, after boiling for about 10 minutes belt stretched enough- with help of screwdriver- to get on edge of pulleys. Used pliers to move belt over into all the groves.
4. Tested- works perfectly.
2. Removed damaged belt.
3. Belt would not go on pulleys. Heated in boiling water for various lengths of time. Finally, after boiling for about 10 minutes belt stretched enough- with help of screwdriver- to get on edge of pulleys. Used pliers to move belt over into all the groves.
4. Tested- works perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set
belt melted
removed motor cleaned melted bett and reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen wrenches
Drive belt broke
Removed side cover. took old belt out and installed new belt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Allen wrench
Belt pulley nut came off and lost on its own.
Fixed it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
belt broke
put on new belt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Monkey wrench
Driving belt worn out
1) Take cover on sides off. Super easy!
2) Squeeze the new belt onto pulleys as instructed on readily available U-tube video.
3) Found out that job takes three hands: the belt is extremely tight and you have very little room to move it onto the appropriate grooves. Tried to loosen it in hot water to no avail.
4) Job done after much squeezing, twisting and groaning. But I would do it myself again with a helping hand at my side.
2) Squeeze the new belt onto pulleys as instructed on readily available U-tube video.
3) Found out that job takes three hands: the belt is extremely tight and you have very little room to move it onto the appropriate grooves. Tried to loosen it in hot water to no avail.
4) Job done after much squeezing, twisting and groaning. But I would do it myself again with a helping hand at my side.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
6 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
2
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Broken belt
Quick delivery, fit great and my wood planer is back working
james -
September 14, 2023
Verified Purchase
replacement belt
great service
WAYNE -
August 28, 2023
Verified Purchase
Great service, quality parts
eReplacement has never disappointed me.
Guest -
May 7, 2022
Verified Purchase
DEWALT BELT
FAST DELIVERY CORRECT PART PRICE TO HIGH THOUGH!
Guest -
January 22, 2021
Verified Purchase
Great part, Fit just right.
Just what I needed.
Guest -
July 22, 2019
Verified Purchase
Didnt fit
I sent it back and I havent heard from you. Ive been expecting my money back.
Gary -
May 22, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
Repair Guides
![]()
Watch the Repair Video for
Belt
Articles:
|
Step-by-step instructions for removing and installing the drive belt on your DeWALT planer....
January 29, 2018
|
