Product Information
Description:
This is a manufacturer sourced replacement part designed for use with Ryobi backpack blowers. This flexible tube is made out of plastic and it is sold individually. This part is attached to straight blower tubes that are sold separately. Over time this part can become brittle and crack allowing for air leaks. This will greatly decrease Blowing/Suction ability of the unit, therefore this part should be replaced. |
Frequently Purchased With
Compatibility
Products Compatibility
This item works with the following types of products:
- • Blower
Questions & Answers for Bellows
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Broken Bellows
Removed the broken bellows and replaced with the new one. Easy twist on and off. No tools needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Bellows had a large crack
Removed the old bellows from the blower elbow. Then attached the new bellows to the elbow.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Bellows cracked
Removed the old replaced with the new, took about 15 seconds
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Had holes in the elbow, losing air pressure.
Removed old and replaced with new. No tools needed, the bellows just twist on and off.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Needed upper tubes
Assembled the upper tubes with the bellows
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Bellows had a hole in it
Take off the old one , and simply connect the new one to the tubes on either side of it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Wire cutters
Bellows broken
1. Removed cable ties
2. Removed defective bellows
3. Installed new bellows
4. Added cable ties to hold throttle cable in place
2. Removed defective bellows
3. Installed new bellows
4. Added cable ties to hold throttle cable in place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, not needed
Bellows was broken
Just twist it in the tubes that connect to it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exact part needed
The exact part I needed, delivered on time, affordable price.
Guest -
May 19, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information