eReplacementParts.com
877-346-4815
Powermatic Parts
Repair Parts Home  Power Tool Parts  Powermatic Parts  BB-608ZZ Ball Bearing

Ball Bearing BB-608ZZ

OEM part for: Jet, Powermatic, Wilton

Part Number: BB-608ZZ


Install
Videos!
Ball Bearing - BB-608ZZ:Jet 360 View
Ball Bearing - BB-608ZZ:JetBall Bearing - BB-608ZZ:JetBall Bearing - BB-608ZZ:Jet 360 View
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Easy 15-30 minutes (7 rated repairs)?
OEM: Original Equipment Manufacturer ?
JetPowermaticWilton
Does this d-block d-md-none fit my product?

Product Description ?

This is an OEM Authorized replacement part used on variety of power tools. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 48 machines

Powermatic

15S (1791210) 15" Spiral Cutterhead Planer View Diagrams & Manuals
15HH (1791213) 15" Helical Cutterhead Planer View Diagrams & Manuals
HPS67 1791287 5 HP 3Ph 230V Horizontal Panel Saw View Diagrams & Manuals
HPS67-1 1791286 3HP 1Ph 230V Horizontal Panel Saw View Diagrams & Manuals
HPS126 7.5 HP 3Ph 230V Horizontal Panel Saw View Diagrams & Manuals
PWBS-14 (1791216K) 1.5HP 1Ph 115/230V Bandsaw View Diagrams & Manuals
PM1500 (1791500) 15-inch Woodworking Band Saw View Diagrams & Manuals

Jet

J-3410 (414454) 7x12 Cut-off Bandsaw View Diagrams & Manuals
J-3410-2 (414455) 7x12 Cut-off Bandsaw View Diagrams & Manuals
HBS-814GH (414466) Geared Head Horizontal Bandsaw View Diagrams & Manuals
J-7015 (414450) 8-in x 13-in Horizontal Cut-Off Bandsaw View Diagrams & Manuals
J-7020 (414472) 10"x16" Horizontal Bandsaw View Diagrams & Manuals
J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw View Diagrams & Manuals
J-7040 (414478) 10"x16" Horizontal Bandsaw View Diagrams & Manuals
J-9180 (414464) 7 in. Zip-Miter Bandsaw View Diagrams & Manuals
J-9225 (414467) 8-3/4 in. Zip-Miter Bandsaw View Diagrams & Manuals
JWP-16OS (708531) Woodworking Planer View Diagrams & Manuals
JSM-30 Air Ratchet Wrench View Diagrams & Manuals
JSM-709R Reversible Angle Drill View Diagrams & Manuals
JWBS-12OS (708901B) 1/2 HP, 1Ph 115V Bandsaw View Diagrams & Manuals
JWBS-14DXPRO Delux Pro Band Saw View Diagrams & Manuals
HVBS-7MW (414459) Band Saw View Diagrams & Manuals
JSM-31 1/2" Air Ratchet Wrench View Diagrams & Manuals
JSM-619 Air Angle Grinder View Diagrams & Manuals
JSM-6195B Air Angle Grinder View Diagrams & Manuals
JSM-804 1/4-inch Air Screwdriver View Diagrams & Manuals
JTS-10DD Table Saw View Diagrams & Manuals
JSL-12BS 12-Inch Bandsaw View Diagrams & Manuals
JPL-358 Pen Lathe View Diagrams & Manuals
JSM-532 1/4" Die Grinder View Diagrams & Manuals
JSM-5252 90 Degree Right Angle Die Grinder View Diagrams & Manuals
JSM-522 1/4" Die Grinder View Diagrams & Manuals
JSM-501 1/4" Die Grinder View Diagrams & Manuals
AG-4.5S 4-1/2" Governed Disc Grinder View Diagrams & Manuals
AG-4S 4" Angle Grinder View Diagrams & Manuals
JSM-5430 Die Grinder View Diagrams & Manuals
JSM-3430 1/2" Air Ratchet Wrench View Diagrams & Manuals
JSM-3330 3/8" Air Ratchet Wrench View Diagrams & Manuals
JSG-0470 7" Angle Sander View Diagrams & Manuals
JSG-0472 7" Angle Polisher View Diagrams & Manuals
JSM-8472 1/4" Air Screwdriver - Positive Clutch View Diagrams & Manuals
JS30 M-Jsm-30 Air Ratchet Wrench Parts View Diagrams & Manuals
JS31 M-Jsm-31 Air Ratchet Wrench Parts View Diagrams & Manuals
JS532 M-Jsm-532 Air Die Grinder Parts View Diagrams & Manuals

Wilton

7015 Horizontal Cut-Off Band Saw View Diagrams & Manuals
7020 (9078341) Horizontal Cut-Off Bandsaw View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Planer Parts
  • Saw Parts
  • Band Saw Parts
  • Miter Saw Parts
  • Ratchet Wrench Parts
  • Drill Parts
  • Grinder Parts
  • Screwdriver Parts
  • Table Saw Parts
  • Lathe Parts
  • Sander Parts
  • Polisher Parts

This part replaces obsolete part #: 6284733, 5632831

Customer Part Reviews ?

5
Average Rating (out of 5):
6 Reviews
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Jet band saw replacement part.
    The Jet Band Saw parts fit perfectly and were delivered quickly. I will use this company again
    Guest - September 12, 2023 Verified Purchase
    Correct part
    This bearing was the correct part and worked as planned it looks and feels just like the factory ones
    Jason - December 13, 2022 Verified Purchase
    Great part easy replacement.
    Came early east to replace.
    Guest - May 13, 2022 Verified Purchase
    Part ordered was the part received. Prompt delivery by USPS.
    Part ordered was the part received in a prompt manner.
    Guest - May 22, 2021 Verified Purchase
    Excellent service!
    Correct part, fast delivery, and my bandsaw is up and running smoothly!
    Guest - May 18, 2021 Verified Purchase
    roller bearing guides
    bearings were for the blade guide on my 12" jet band saw. was quick...quicker and easier then I planned. it was the 1st time since I bought the saw that I replaced the bearings. should have done this much sooner as the saw now runs much smoother and much more quieter.
    Guest - August 12, 2020 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Ball Bearing


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (7 rated repairs)?

    The lower blade guide bearings siezed up on my Jet JWBS-14SAF-3 band saw

    John - February 21, 2017
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Vice, vice grips, solderring iron.

    I had to remove a knurled knob to get the old bearings off. . The parts department at Jet told me the knob was pressed on, it wasn't. The technical support department told me it was threaded on, and that it had thread lock on the threads. I drilled a hole in a block of wood about the same size diameter of the shaft I had to hold. Then I cut the block in half (along the length of the hole) so that I could wrap sandpaper around the shaft and put it in the block and then in the bench vice. That gave me a good grip on the shaft so it wouldn't spin. Then I used vice grip pliers to remove the knurled knob. Once the knob was off I pried the old bearings off using a screwdriver and pliers. I heated the new bearings just a little so that they slid on the shaft easily. To heat the bearings I just slid them (one at a time) over my soldering iron shaft for a few seconds. Then I re-assembled everything.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Older Metal Band saw had some wore out parts, New replacement saw was $1600. Fix the old one for a couple hundred.

    Terry - February 1, 2021
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Socket set, Wrench Set

    Disassembled, then reassembled.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bearings needed replacement

    Eric - July 13, 2020
    Tool Type

    Planer

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers, Power Drill, Socket set, Bearing puller

    Followed rigid parts diagram found online, rigid manual and common sense. I needed to buy a bearing puller to do it right but wasn’t very expensive
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    rollerbearing was seized

    Jeff - March 6, 2019
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set, Wrench Set

    Removed panhead screw and roller bearing and re-installed the new ones...got the parts from E-Replacement parts in a very short time from ordering and got back up and running in a very short time...VERY PLEASED...!!!!!!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bracket holding the lower guide bearing came loose

    Ted - April 14, 2018
    Tool Type

    Band Saw

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Socket set, Wrench Set

    Remove table,removed blade, removed tires, replaced bearings and added bushing and larger washers to hold lower bracket in place. install new tires top & down, installed new blade, realigned bearing guides, blade on the tires, reinstall table, back to work
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Lost blade guide thumb screw.

    Dave - February 10, 2018
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , No tools requird

    Replaced missing Thumb Screw. Kept the ball bearing for spare part.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Required new parts

    Dickie - May 26, 2016
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Allen Wrench

    I removed the old guide blocks from the brackets. And put a dollar bill between them and the blade for the correct placement. I then remove the old bearings and placed the new ones in and adjusted them so the blade was just almost touching them.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal