eReplacementParts.com
877-346-4815
Metabo HPT (Hitachi) Parts

Install
Videos!
Ball Bearing - 608VVM:Metabo HPT (Hitachi) 360 View
Ball Bearing - 608VVM:Metabo HPT (Hitachi)Ball Bearing - 608VVM:Metabo HPT (Hitachi)Ball Bearing - 608VVM:Metabo HPT (Hitachi) 360 View

Ball Bearing 608VVM

Part Number: 608VVM
Metabo HPT (Hitachi)Tanaka
Availability: Usually ships in 7 - 12 business days
Price: $8.53
Leaves our warehouse within
7 - 12 business days

*This part replaces obsolete part #: 608-DDM, 608DDM and 321399.

Product Information
Description:
Genuine Manufacturer Sourced replacement part used on Hitachi Power Tools. This part is made out of Metal and it is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Metabo HPT (Hitachi)
CM4SB2 4" Dry-Cut Masonry Saw
CD14F 14" Portable Dry Metal Cutting Saw
CD14F 14" Portable Dry Metal Cutting Saw
H45FRV 3/4" Hex Demolition Hammer
H45MRY SDS Max Low Vibration Demolition Hammer
D10VF 3/8" 9.0 Amp EVS Reversible Drill
D10VG 3/8" 9.0 Amp EVS Reversible Drill
D10VH 3/8" 6.0 Amp EVS Reversible Drill
D10YB 3/8" 4.6 Amp Dial-in EVS Reversible Right Angle Drill
D13 1/2" 6.2 Amp Reversible Drill
D13VF 1/2" 9.0 Amp EVS Reversible Drill
D13VFKL 1/2" 9.0Amp EVS Keyless Reversible Drill
D13VG 1/2" 9.0 Amp EVS Reversible Drill
G10SR2 4" Disc Grinder
G10SS 4" Angle Grinder
G12SA3 4-1/2" Grinder
G12SR2 4-1/2" Disc Grinder
GP2 1" Die Grinder
WR16SA 1/2" Impact Wrench
WR22SA 3/4" Impact Wrench
CJ110MV Variable Speed Jig Saw
CJ110MV Variable Speed Jig Saw
CJ120V Electronic Variable Speed Orbital Jig Saw
CJ120V Electronic Variable Speed Orbital Jig Saw
VB16Y Grade 60 EVS Rebar Cutter / Bender
C12FCH 12" Laser Compound Miter Saw
C12FCH 12" Laser Compound Miter Saw
C12FDH 12" Laser Dual Compound Miter Saw
C12FDH 12" Laser Dual Compound Miter Saw
C12LCH 12" Compound Miter Saw
C12LCH 12" Compound Miter Saw
C12LDH 12" Dual Compound Miter Saw
C12LDH 12" Dual Compound Miter Saw
C12LSH 12" Sliding Dual Compound Miter Saw
C12LSH 12" Sliding Dual Compound Miter Saw
C12RSH 12" Sliding Dual Compound Miter Saw
C12RSH 12" Sliding Dual Compound Miter Saw
C8FB2 8-1/2" Twin Rail Sliding Compound Miter Saw
C8FB2 8-1/2" Twin Rail Sliding Compound Miter Saw
P20SBK 3-1/4" Planer
CR18DL 18V 3.0Ah Lithium Ion Reciprocating Saw
CR18DL 18V 3.0Ah Lithium Ion Reciprocating Saw
CR13V 10 Amp Reciprocating Saw
CR13V 10 Amp Reciprocating Saw
CR13VA Electric Variable Speed Reciprocating Saw
CR13VA Electric Variable Speed Reciprocating Saw
CR13VBY 12 Amp Low Vibration UVP Reciprocating Saw
CR13VBY 12 Amp Low Vibration UVP Reciprocating Saw
DV16V 5/8" Hammer Drill
DV16V 5/8" Hammer Drill
DV20VB2 1/2" 8.3 Amp 2-Mode Hammer Drill
DV20VB2 1/2" 8.3 Amp 2-Mode Hammer Drill
FDV16VB2 5/8" 5.0 Amp 2-mode VSR Hammer Drill
FDV16VB2 5/8" 5.0 Amp 2-mode VSR Hammer Drill
DH38YE 1-1/2" Rotary Hammer, 2-Mode, Spline Shank
DH40FR 1-9/16" Spline Shank Rotary Hammer
DH40MRY 1-9/16" SDS Max UVP Rotary Hammer
DH22PG 7/8" SDS Plus Rotary Hammer
DH24PB3 15/16" SDS Plus Rotary Hammer
DH24PC3 15/16" SDS Plus Rotary Hammer
DH24PF3 15/16" SDS Plus Rotary Hammer
DH25PB 31/32" VSR SDS-Plus Rotary Hammer
DH30PC2 1-3/16" SDS+ Rotary Hammer
KM12VC 2-1/4HP Variable Speed Fixed/Plunge Base Router
M12VC 2-1/4HP Variable Speed Fixed Base Router
S18SB 7" Vertical Sander
SP18VAH 7" Disc Sander/Polisher
SP18VAH 7" Disc Sander/Polisher
SB8V2 3" x 21" Variable Speed Belt Sander
W6V4 6.6 Amp, 4,500 RPM Drywall Screwdriver
W6VA4 6.6 Amp, VSR, 3,000 RPM Drywall Screwdriver
W6VB3 6.6 Amp, VSR, 2,600 RPM Drywall/Framing Screwdriver
W6VM 6.6 Amp, 6,000 RPM Drywall Screwdriver
W8VB2 VSR TEKS Metal to Metal Screwdriver/Nutrunner
CE16SA 16 Gauge Shear
CN16SA 16 Gauge Sheet Metal Nibbler
CR24DV 24V Variable Speed Reciprocating Saw
CR24DV 24V Variable Speed Reciprocating Saw
CR18DV 18V Variable Speed Reciprocating Saw
CR18DV 18V Variable Speed Reciprocating Saw
C7D 24V 7-1/4" Circular Saw
C7D 24V 7-1/4" Circular Saw
C12LC 12" LCD Compound Miter Saw
C12LC 12" LCD Compound Miter Saw
C12FSA 12" Sliding Dual Compound Miter Saw
C12FSA 12" Sliding Dual Compound Miter Saw
C10FCD 10" Dual Compound Miter Saw
C10FCD 10" Dual Compound Miter Saw
C10FCB 10" Compound Miter Saw
C10FCB 10" Compound Miter Saw
M12SC 2-1/4HP Single Speed Fixed Base Router
KM12SC 2-1/4HP Single Speed Fixed/Plunge Base Router
SV12SF 1/4 Sheet Orbital Finishing Sander
SV12SD 1/2 Sheet Orbital Finishing Sander
CE16 Portable 16 Gauge Shear
G12SA2 4-1/2" Disc Grinder
G12S2 4-1/2" AC/DC Disc Grinder
SP18SA 7" Polisher
SAT180 7" 2-Speed Disc Sander/Polisher
SAT180 7" 2-Speed Disc Sander/Polisher
S18SA 7" Sander
W6VB2SD 2600rpm SuperDrive Kit
W8VB 6.4 Amp, VSR, 1700rpm Screwdriver/Nut Runner
W6VB2 6.4 Amp, VSR, 2600rpm Drywall/Framing Screwdriver
W6V3L 6.4 Amp, VSR, 4000rpm, 25ft cord Drywall Screwdriver
WH22 3/4" 10 Amp Square Drive Impact Wrench
WH16 1/2" 5.0 Amp Square Drive Impact Wrench
DV24DV 24V 1/2" Variable 2-Speed Hammer Drill
DV24DV 24V 1/2" Variable 2-Speed Hammer Drill
DV20VB 1/2" Hammer Drill
DV20VB 1/2" Hammer Drill
DV14V 3/8" VSR 5.0 Amp Hammer Drill
DV14V 3/8" VSR 5.0 Amp Hammer Drill
DH24PE Hammer Drill
DH24PE Hammer Drill
DH22VB Hammer Drill
DH22VB Hammer Drill
D13VB2 1/2" Reversible Drill
H45MR SDS Max Shank Demolition Hammer
DH40MR 1-9/16" SDS Max Rotary Hammer
DH22PB 7/8" SDS Plus Rotary Hammer
DH24PB 15/16" SDS-Plus Rotary Hammer
DH24PB2 15/16" SDS Plus Rotary Hammer
DH24PC 15/16" VS SDS-Plus Rotary Hammer
DH24PC2 15/16" VSR SDS-Plus Rotary Hammer
DH24PE(S) 15/16" VSR SDS-Plus Shank Rotary Hammer
DH24PF 15/16" SDS Plus Rotary Hammer
DH24VD Rotary Hammer
DH30PC 1-3/16" VSR SDS-Plus Rotary Hammer
CR18DMR Cordless Reciprocating Saw
CR18DMR Cordless Reciprocating Saw
CJ18DL 18V 3.0Ah Lithium Ion Jig Saw
CJ18DL 18V 3.0Ah Lithium Ion Jig Saw
C10FS Slide Compound Saw
C8FB Slide Compound Saw
C4Y 4-3/8" Circular Saw
C4Y 4-3/8" Circular Saw
C10FB 10" Miter Saw
C10FB 10" Miter Saw
C7SA Circular Saw
C7SA Circular Saw
C7SC Circular Saw
C7SC Circular Saw
CB10V 4" Rotary Band Saw
CB10V 4" Rotary Band Saw
CB10VA Rotary Band Saw
CB10VA Rotary Band Saw
CJ110V Jig Saw D-Handle
CJ110V Jig Saw D-Handle
CJ120VA 5.8A Electric Variable Speed Barrel Grip Jig Saw
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Band Saw
  • • Circular Saw
  • • Demolition Hammer
  • • Drill
  • • Grinder
  • • Hammer Drill
  • • Impact Wrench
  • • Jig saw
  • • Miter Saw
  • • Nibbler
  • • Planer
  • • Polisher
  • • Reciprocating Saw
  • • Rotary Hammer
  • • Router
  • • Sander
  • • Saw
  • • Screwdriver
  • • Shear
  • • Table Saw
Expand List

Questions & Answers for Ball Bearing


No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Ball Bearing - 608VVM
Carbon Brush Set - 999043
Ball Bearing - 6001VV
Cord Clip - 937631
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Power Drill, Socket set, Needed gear pullers to remove bearings.
Bearings on armeture went bad. Brushes were worn, needed replacing.
1.) I did all the dis-assembly in my shop.
2.) Since the bearings were pressed on and I didn't have gear pullers I went to a machine shop. In twenty minutes we had the bearings off and the new ones on.
3. It took about 20-30 minutes to re-assemble the saw.
4.) 20 year old saw works as well as the first day I got it

Thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Ball Bearing - 608VVM
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Nutdriver
Lower ball bearing assembly on motor armature failed.
1. Removed the stator cover, as well as motor 'brushes'
2. Used bearing puller to remove old bearing assembly.
3. Tapped new ball bearing assembly in place.
4. Reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Switch (1p Screw Type) - 320950
Ball Bearing - 608VVM
Ball Bearing 6203ddcmps2l - 6203VV
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Vise, bearing puller, Wrench to remove blade
Intermittent start/run, Cuts were skewed vertically
1) Remove Blade
2) Open handle remove & Replace Switch
3) Disassemble gear box and remove final drive
4) Remove & Replace bearings (where we used a puller)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Ball Bearing - 608VVM
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Wrench Set, Dremel
compound miter slide saw nolonger making cabinet grade cuts. Blade wobble.
Disassembled saw, removed blade, drive cover (inner and outer)tapped drive shaft from housing with dead blow hammer did not have small enough bearing puller. Used dremel and chisel. removed old grease/cleaned. Heated new pinion shaft bearing on 100 watt lightbulb to 200F and tapped into place. Reassembled drive, greased with EP Moly and reassembled. Saw cuts like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Ball Bearing - 608VVM
Flat Hd.screw (w/ Washer)m5x35 - 996240
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, 1/2 \\
2 main bearing broken.
1. Remove cover.
2. Drive off the 2 bearing.
3. Drive 2 bearing in.
4. Install all back.
5. Test.
6. Put the tool to work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Ball Bearing - 608VVM
Ball Bearing 6201vvcmps2l - 6201VV
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set, dead blow, allen wrenches,screwgun
motor support bearings worn out
replaced with new bearings simply but needed dead blow to remove old and seat new bearings
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Ball Bearing - 608VVM
Cord - 500241Z
Carbon Brush Set - 999043
Ball Bearing - 6001VV
Nylon Clip - 948193
Bearing Lock - 976301
Indicator - 996220
Indicator - 322026
Ball Bearing 6004vvcmps2l - 6004VV
Cord Armor D10.1 - 994565
8-1/2 - 998840M
Rubber Ring - 958130
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Bench Grinder, Hammer , Bearing Puller, Putty Knifes,Dsocket
I had bearing failure on the armature lg bearing & also in the gear spindle. I also replaced two broken pointers, a bad cord, & installed a new cord with clips that had broken.
1) Disassembled the saw & ordered the parts I needed to repair. When replacing bearings it's best to replace all of them due to their age.
2) I began the repair on the bearings on the armature the small one first. It came right off with the bearing puller I cleaned the tiny shaft & placed the new bearing in the shaft and tapped with the hammer once square pushed it in by using an 8 inch C-Clamp.
3) The larger bearing on the other end by the fan was really bad but the puller had to be modified so I could get behind the bearing to be able to pull it off. Once off the same procedure was used to install the larger one.
4) The Armature bearings have been replaced now to reinstall it into the handle portion, cleaned then installed the new bearing, installed the armature then installed the set of new brushes & reinstalled the handle section to the saw.
5) The gear spindle bearings I thought would be a challenge but the larger recessed bearing came right off easily by pulling the aluminum holder with the bearing once off push the bearing out if the aluminum holder with your fingers.
6) The smaller bearing on the end by the gear was so close I had to use 2 putty knifes to pry off enough to be able to get 2 larger screw drivers under it to finish prying off.
7) Once apart clean and reinstall both bearings being mindful to assemble the larger one first into the aluminum holder & making sure it starts square. For squeezing this on I used a deep well socket that fit over the shaft but making sure it was also touching the inner race as not to damage the bearing. I then squeezed it on by using the C-Clamp it will stop in the correct place on the shaft by itself. Now for the smaller bearing in the other end start square then squeeze on but this time you have to use a small washer that fits over the small shaft cause the bearing goes by the end if the shaft by .020 there bearings installed.
8) Grease and install into saw finish installing blade guards and new blade.
9) I then installed the new cord with clips and new pointers.
All parts now installed and the saw is like new again. I have had and use this saw so much I hated to buy a new one because of it' simplicity I am very pleased with the repair as well as ereplacement.com for making the parts available for purchase. Just take your time and pay attention to detail and you will have the same success.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Ball Bearing - 608VVM
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Adjustable Wrench, Router wrenches, vise grips, large deep socket
Router bottom bearing replacement
Completely disassembled the router, used a deep socket to drive out the bearing.
Special care taken to put all the wires back into place and the speed ratio sensor
so that the magnet fit back onto the recess of the sensor
reassembly was completed and the router runs smoothly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Router
Parts Used:
Ball Bearing - 608VVM
Carbon Brush Set - 999043
Rubber Ring - 323420
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Bearing puller
Router bearing seized on front end of Hitachi mv12c
Disassembled Hitachi Mv12c router, used bearing puller to removed old bearing, inserted new bearing and rubber gasket. Also replaced carbon brushes as this router was being used in a CNC so was in operation for long periods of time. Reassembled and tested. Runs perfectly!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Ball Bearing - 608VVM
Carbon Brush Set - 999043
Table Insert - 998818
Switch - 998839
Ball Bearing 6004vvcmps2l - 6004VV
Spring - 996234
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Bench Vice
Periodic bearing squeal and auto break feature did not engage.
1-Took blade off, took off screws to remove bearing assy.
2- Pried off both pressed on bearings and used vice to press on new bearings.
3- The process in line 2 is difficult and requires some knowledge in this area. (recommend buying the whole assembly for 73 dollars)
4- Screwed assembly back in.
5- For main spring, unscrewed the two set screws holding main pin and removed pin.
6- Put in new spring and reassembled.
7- Put in new switch to fix auto break function.
8- Put in new brushes which also helped the auto breaking.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • right part works great
    parts fit perfectly grinder runs again
    Guest - March 18, 2023 Verified Purchase
    Hitachi hammer drill
    As always when I need parts for a tool,a mixer or what have you ereplacement parts comes thru the bearings I bought worked perfect and now it’s back working.
    Guest - November 27, 2022 Verified Purchase
    Perfect.
    The right part, as described! Fast shipping and a reasonable price.
    Kevin - February 24, 2020 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal