Compression Nut SSP-7812

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set

outlet tube cracked

Nothing special take tube off put nuts on new tube then o-ring , and tighten it back in place simple thank you for having the parts I needed. Planing on other repairs now I know where to get parts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Compressor

Parts Used:

Outlet Tube - A14226

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Adjustable Wrench

I had to order a second set of parts due to the angle tube was wrong on the first one. While trying to make it work I messed it up.

1. Remove compressor housing
2. Unscrew the nuts and remove outlet tube
3, Check new outlet tube to make sure angle is correct
4. Install O-Ring and nuts
5. Insert outlet tube with nuts and hand tighten nuts
6. Tighten nut on compressor and then tank nut
7. Turn on and spray connection with soapy water
8. Replace housing

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Compressor

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Wrench Set, 6\\

outlet tube had a hole in it.

took the broken Outlet tube off then re-installed the new Outlet tube in reverse order of taking it off...

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Compressor

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Wrench Set, Adjustable Wrench

Inlet tube was cracked

Removed plastic casing took off brass nuts installed new tube note of caution I planned on reusing the existing brass nut, o ring and compression nut the brass nut and o ring can be reised but you will have to get a new compression nut with collar once tightened it can't be reused and these fittings do not come with the new inlet tube.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Compressor

Parts Used:

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set

The outlet tube was busted, cracked

Had to remove the top plate which holds the manifold, the part that has the gauges and hose outlets on it. Then I had to remove the outlet tube using a 14 mm wrench. I had to put on the o-ring and nuts making sure they go in the right direction, the compression fitting has to go on a certain way. I then tightened the tube down. Replaced manifold and replaced the top plate. I did some other things like checked the regulator. Made sure the cutoff was working right.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Compressor

Parts Used:

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Wrench Set, Torx driver

Broken outlet air tube

Remove both Wheels to gain access to the shroud around the compressor once both shroud halfs are off the air outlet tube nuts are visible loosen nuts remove tube take notice where the o-ring is located.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Compressor

Parts Used:

Outlet Tube - AB-9043896

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Wrench Set

Compressor wouldn't hold pressure.

1. Replaced check valve (use red loctite)
2. Replace tube with both nuts (compression fitting is hard to reuse)
3. Let sit overnite then start

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Compressor

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Wrench Set

Outlet tube broke when the compressor was dropped off a truck.

Removed the plastic housing. Outlet tube was readily accessible. Unscrewed the nuts that attached the tube to the compression unit. Installed new tube. Easy. Cost me about $30 to repair a $350 compressor.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Compressor

Parts Used:

Kit-isolator W/screw (contains - D24721

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Adjustable Wrench

would not build pressure, bad o-ring and bent tube

Removed the tube assembly, extracted damaged o-ring from exhaust port. Installed o-ring onto the tube, installed both the hex and compression nuts; tightened evenly. The tested operation. Completed repair.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Compressor

Parts Used: