How to Replace the Safety Valve on an Air Compressor

If leaking seals and service bills are distressing your compressor, it's time to face the fix. While air compressors can be as diverse as the individuals that use them, most models share some general characteristics and components. Whether you are inflating your tires or creating empires, eReplacementParts.com provides the parts, procedures and facts you need to fearlessly fix what fails you.

The safety valve is designed to keep the air compressor pump from over-pressurizing the tank. Over time, the spring inside this valve can deteriorate, allowing air to escape at too low of a pressure. Safety valves are preset to very specific pressure tolerances, so it is important to match the specifications of your specific compressor model when replacing the safety valve.

Less than impressed with your compressor? Replacing the safety valve may be the solution. This article will show you how to complete the repair like an expert technician.   THE FACTS | THE FIX | THE FINISH ! DEPRESSURIZE THE AIR TANK.

Always depressurize the tank before servicing an air compressor. To do this, open the drain valve and wait until all of the air (and pressure) has escaped.

  REMOVING THE SAFETY VALVE  [top] 1. Remove the manifold cover.

Remove the retaining screw.

Lift the manifold cover away from the unit.

    2. Remove the safety valve.

Use a wrench to loosen the safety valve.

Remove the safety valve from the manifold.

    INSTALLING THE NEW SAFETY VALVE [top] 3. Install the new safety valve.

Thread the safety valve into the manifold (this valve comes with sealant pre-applied to the threads; additional sealant is not required.

Use a wrench to secure the safety valve.

  REASSEMBLING THE UNIT [top] 4. Reinstall the manifold cover.

Install the manifold cover.

Secure the manifold cover with the screw.

  THE FACTS | THE FIX | THE FINISH

A well-maintained air compressor can mean the difference between performance under pressure, and under-pressured performance. But you don't have to empty your pockets to keep your air tank full. As you just learned, repairing your air compressor is simpler than you think, especially when you follow our step-by-step guides. Not only did you refresh compression at a fraction of the cost of replacement; you have inflated your ability to fearlessly face the next fix, regardless of the pressure involved. Find your next fix here.   [top]