How to Replace the Starter Assembly on a Makita Cut-Off Saw Model DPC7311

If engine rust and concrete dust are cutting into your construction budget, it's time to face the fix. Whether you are a master mason or a backyard builder, eReplacementParts.com provides the parts, procedures and facts you need to fearlessly fix what fails you.

The starter assembly is a simple, bolt-on replacement for the starter on a Makita DPC7311 cut-off saw. The assembly is composed of many smaller components, which could be changed individually. However, when several of these components are faulty, or you do not have the time to individually diagnose them, replacing the entire assembly is an easy and economical repair that you can complete in about 10 minutes.

Let's get (your saw) started:  

THE FACTS | THE FIX | THE FINISH   REMOVING THE STARTER [top] 1. Remove the starter assembly.

Remove the four mounting screws.

FIXTRIX: The lower-left screw can be accessed more easily using an extended driver.

Remove the starter assembly.

  INSTALLING THE NEW STARTER [top] 2. Install the new starter assembly.

Align the starter assembly with the mounting holes on the engine.

Gently pull the starter rope (one time) to align the internal components.

Secure the starter assembly with the screws.

  THE FACTS | THE FIX | THE FINISH While cutting concrete can be a valuable skill; cutting costs is priceless. But you don't have to be a master mason to cut out the middle-man. As you just learned, maintaining your own power equipment allows you slash offsite repair costs and empowers you to face future fixes wherever you may find them. Save your starter. Start your savings. Find your next fix here.   [top]