Why Read This Article?
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Article Breakdown
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Video
Tools & Materials
- Socket Wrench Set
- Adjustable Wrench
Purchase the isolator mounts here! Removing the Isolator Mounts
1. Remove the backpack harness nuts
Use a socket wrench to loosen and remove the four nuts securing the harness to the blower.
2. Pull the backpack harness away from the unit
With the four nuts removed, you can simply pull the harness away from the blower.
3. Loosen the isolator mounts
Use an adjustable wrench to loosen each of the four isolator mounts.
4. Remove the isolator mounts
Once you've loosened up the four mounts with a wrench, use your fingers to unscrew them and set them aside.
[Back to Top]
Installing the Isolator Mounts
1. Install the new isolator mounts
Use your fingers to thread the four new mounts onto the blower.
2. Secure the new isolator mounts
Use the adjustable wrench to tightly secure the new isolator mounts.
3. Replace the backpack harness to the blower
Simply set the harness back into its original location.
4. Secure the backpack harness.
Finalize this repair by securing the backpack harness with the nuts that were removed above.
[Back to Top]
Conclusion
And that's how easy it is to replace the isolator mounts in your backpack blower. If your blower needs any other sort of maintenance or repair, we're here to tell you that you can repair it on your own. Simply search our Repair Center for a complete guide!
Need any other parts for your blower? We've got everything you could need.
[Back to Top]
What We're About
