eReplacementParts.com
877-346-4815
Repair Center
Preferred Partners of
Repair Center  How to Hot-Wire Test a Cordless Drill Motor

Why Read This Article?

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

Article Breakdown

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

Video

Tools & Materials

  • Two wires for testing the drill motor.
  • Other tools for dismantling the drill.

Safety Guidelines

  • Remove the battery before dismantling the drill.
  • Double check that the switch is wired correctly after reassembly.

How to Hot-Wire Test a Cordless Drill Motor

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
The power switch may not be the problem if a cordless drill stops turning on. Sometimes a bad drill motor can prevent the tool from starting, even if the switch is good. To determine the problem, the best method is to remove the switch and then hot-wire the drill motor to the drill's rechargeable battery to test it. If the motor checks out, then it's probably the switch. The steps for testing a drill motor in this way are listed below, and are accompanied by our video for hot-wire testing a cordless drill motor. In addition to tools needed for dismantling the cordless drill, such as a drill/driver, two wires are needed to connect the motor wires to the drill battery.   Steps to Hot-Wire Test a Drill Motor

1.  Remove the drill's battery and dismantle the drill.

2.  Disconnect the wires leading from the switch to the drill motor. Sometimes this means completely removing the switch.

Remove Switch Wires

3.  Now that the motor is isolated from the switch, connect one of the motor wires to one of the battery contacts using one of the two wires set aside for this test.

Connect First Motor Wire

4.  Connect the second wire to the other battery contact.

(Note: It does not matter which motor wire is connected to which battery contact. The orientation is not important because it is a DC motor and will only determine which direction the motor spins.)

5.  Hold the motor firmly in one hand, and then complete the electrical circuit between the battery and the motor by connecting the second wire to the the second motor wire.

If the motor does not spin once the second connection is made, then the drill motor is most likely fried and needs to be replaced.

If the motor does spin after completing the electrical circuit, that's a good indication that the motor is a healthy one. If the motor tests out OK but the drill is still having trouble starting up, the problem is most likely caused by a faulty power switch, not the motor.

Connect Second Motor Wire
The power switch will have to be reconnected to the drill after the motor has been tested. It is important to reinstall the switch wires correctly after performing this test. The example drill used in this article has a very simple wiring configuration in its power switch. Drawing a switch wiring diagram is especially useful for switches with complicated wiring configurations. For more about Wiring Diagrams--Click here.
  If you're testing your drill's motor, chances are that some kind of part replacement is on the horizon. You can begin your part search on our Home Page, or by using the "Model Number Search" at the top of this page. eReplacementParts.com is proud to offer "How-To" resources like this article and a huge parts inventory to make tool diagnosis and repair easy.
  [Back to top] What we're about.

SHOP FOR CORDLESS DRILL PARTS
Need cordless drill parts? We'd love to help you find the one you need.
Shop our wide selection of Cordless Drill Parts straight from the manufacturer and we will have the right fit to you in no time.

Organize Your Home in a Snap!

The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!

"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away ... Very convenient. I'm impressed."
★★★★★ -Clever Jeff ★★★★★

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal