eReplacementParts.com
877-346-4815
Husqvarna Parts

Air Filter 597797901

OEM part for: Husqvarna, Craftsman, Jonsered

Part Number: 597797901


Install
Videos!
Air Filter - 597797901:Husqvarna 360 View
Air Filter - 597797901:HusqvarnaAir Filter - 597797901:HusqvarnaAir Filter - 597797901:HusqvarnaAir Filter - 597797901:HusqvarnaAir Filter - 597797901:Husqvarna 360 View
In Stock
Order within the next 8 hours and your part ships today!
Easy 15-30 minutes (26 rated repairs)?
OEM: Original Equipment Manufacturer ?
HusqvarnaCraftsmanJonsered
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine Husqvarna replacement part, it is sold individually.
The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage.

Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 21 machines

Husqvarna

125B 28cc 2-Stroke 170-MPH Gas-Powered Handheld Gas Blower View Diagrams & Manuals
125BVX (2008-01) Handheld Leaf Blower View Diagrams & Manuals
125BVX (2007-05) Handheld Leaf Blower View Diagrams & Manuals
125BVX (2011-04) Handheld Leaf Blower View Diagrams & Manuals
125BVX (2010-06) 952711902, Handheld Leaf Blower View Diagrams & Manuals
125BX (2008-06) Handheld Leaf Blower View Diagrams & Manuals
125BX (2010-06) Handheld Leaf Blower View Diagrams & Manuals
125BVX (2001-04) 28cc 2-Cycle Gas Powered 170 Mph Blower/Vac With Smart Start View Diagrams & Manuals
125BVX (2008-06) 28cc 2-Cycle Gas Powered 170 Mph Blower/Vac With Smart Start View Diagrams & Manuals

Craftsman

358794810 Blower View Diagrams & Manuals
358794811 Blower View Diagrams & Manuals

Jonsered

B2126 EU ROW AU NZ (2011-03) Blower View Diagrams & Manuals
B2126 EU RoW AU NZ (2011-04) Blower View Diagrams & Manuals
B2126 ROW (2008-03) Blower View Diagrams & Manuals
B2126 US CAN (2008-03) Blower View Diagrams & Manuals
B2126 US CAN (2010-06) Blower View Diagrams & Manuals
BV2126 (2008-06) Blower View Diagrams & Manuals
BV2126 EU ROW AU NZ (2010-06) Blower View Diagrams & Manuals
BV2126 US CAN (2008-03) Blower View Diagrams & Manuals
BV2126 US CAN (2010-06) Blower View Diagrams & Manuals
B2126 (2008-06) Blower View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Blower Parts

This part replaces obsolete part #: 5451121-01, 545112101

Repair Videos ?

Watch the Repair Video for Air Filter

Customer Part Reviews ?

5
Average Rating (out of 5):
14 Reviews
Click to filter by ratings:
5 stars
14
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • Thanks fit perfect
    Working great
    Guest - November 7, 2022 Verified Purchase
    easy repair
    works great ,hard to find part at other stores
    Guest - March 12, 2022 Verified Purchase
    Fast and easy
    Just what I needed...
    james - February 18, 2022 Verified Purchase
    Fast easy service
    Great parts at a fair price
    Guest - November 5, 2021 Verified Purchase
    worked just like it suppose to
    Made the motor run better
    Guest - September 30, 2021 Verified Purchase
    Easy fix
    Easy fix & replacement. Parts arrived on time and order was correct.
    Corey - August 16, 2021 Verified Purchase
    Exact replacement
    Fit like a glove on my Husqvarna blower
    RM - May 15, 2020 Verified Purchase
    Exact fit
    Exact fit. Blower working used while installing new carb and fuel lines
    Frederick - January 2, 2020 Verified Purchase
    Repair
    Great product
    Peter - September 11, 2019 Verified Purchase
    Easy to order easy to replace
    My blower was waiting for this
    Guest - May 24, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Air Filter


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (26 rated repairs)?

    Engine chugging

    Ronald - April 21, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Hand power only

    I keep extra air filters at the house, but this machine, I had run out. I cleaned the filter with choke cleaner and it operated okay. I ordered two new air filters so as not to have trouble again. All you need to do is remove the air filter cover and remove the old air filter, then replace it with the new one. Then replace the cover.
    This company has the best prices of most companies and original factory specs. The service they provided to me was some of the best services in quite some time. I will be ordering for my other equipment, air filters and plugs too.
    Thank you so much for the great job!!!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Replacing fuel filter and air filter

    ronald - April 19, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Blower

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Socket set, Nutdriver

    In the course of replacing the filters (easy repair) I noticed dirt and debris in and around the carburetor. I decided to remove the blower housing to gain access to the carburetor. I carefully removed the carburetor making sure not to damage the gaskets.

    Using a carburetor cleaner I sprayed the unit and it easily removed the gunk and dirt that had built up. The cleaned carburetor with new filters and spark-plug work great. The motor is running with more power.

    If you do this repair there are some great videos on YouTube that I found extremely helpful.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Blower hard to start and wouldn't idle unless choke was on. Apparent effect of using old gas.

    Roy - April 13, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Pliers, Nutdriver, 21 spline carburetor adjusting tool

    Used a nut driver to remove the old carburetor assembly. Removed and re-attached fuel lines to the new carburetor in the same way they were previously attached. Installed the new carburetor assembly with new gaskets. Removed and re-installed the in-tank fuel filter and installed the new air filter. The blower started right up and the Hi and Low speed needles and idle speed were adjusted using a 21 spline carburetor adjusting tool and phillips screw driver. The parts arrived earlier than expected and were exactly what I needed to get my blower going. I'll use eReplacementParts again. Thanks.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Filter dirty

    Tom - August 8, 2021
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , Fingers

    Removed filer cover
    Took out old filter keeping orientation of filter.
    Placed new filter using orientation from old one
    Replaced cover and hand tightened cover screw
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Filter needed replacement to ensure proper running of machine

    Tracey - June 4, 2020
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed cover plate
    removed soiled filter
    replaced w/ new filter
    reattached cover plate
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    wont run

    LEE - June 7, 2019
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set

    replaced carb
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Engine wouldn't run without choke on, and could not advance the throttle

    Jeff - January 27, 2019
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Power Drill, Socket set

    removed starter and blower case on that side. removed air filter and filter housing. pulled carburetor and gaskets. then just put new carb and gaskets, and fuel lines in place and tightened down. replaced outer case and starter mechanism. No special instructions other than it's easier to put the fuel lines back on the new carb before you slide it onto the bolts.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    No spark

    Kenneth - September 27, 2018
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set

    Removed starter rope housing and housing below it, removed wires from old coil , put new coil in place, used business card to set clearance between coil and flywheel, put wires in place, removed business card, replaced housings. Put plug wire on, pulled and she fired up. Air filter removed knob then housing then filter put in new filter, replaced housing and knob.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Broke purge valve

    Javier - March 28, 2018
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Socket set

    Removed the cover , disconnected the valve and replaced it with the new one.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Primer bulb split due to heat in storage

    dewayne - March 28, 2018
    Tool Type

    Blower

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Nutdriver

    Removed air filter and bulb from unit and reinstalled the new one.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal