Product Information
Description:
This is a genuine manufacturer-approved part which is designed for Andis clippers. It is part of the unit handling on/off operation. Unfortunately, over time components may wear out and begin to fail eventually requiring a replacement. It is a simple repair that should only require a screwdriver to take the housing apart to remove the old switch and secure the new one. Note, this high-quality plastic body switch is sold as an individual component. Refer to the appropriate diagrams for your model to ensure the proper replacement procedure. |
Compatibility
This part is compatible with the following machines:
the 12 compatible machines
Products Compatibility
This item works with the following types of products:
- • Hair Clipper
Questions & Answers for Agr Switch
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, tester and soldering gun
clipper stopped working. on/ off switch failed.
1 tested and cleaned clipper.
2 ordered switch.
3 unsoldered wires.
4 replaced switch.
5 soldered wires to new switch.
6 reassembled clipper.
2 ordered switch.
3 unsoldered wires.
4 replaced switch.
5 soldered wires to new switch.
6 reassembled clipper.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Replace armature, new brush and new switch
Remove old brushes and armature
installed new armature and brushes
De-solder wire from switch. Re-solder new switch
Works like new.
installed new armature and brushes
De-solder wire from switch. Re-solder new switch
Works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information